NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WNAP 320 kernel panic firmware
Hi,
I have a wnap320 that in an update (I supose). the firmware has been damaged.
I can not connect via ethernet in any way.
Neither managed by the concentrator or isolated. I have reset it a thousand times and never take any ip.
Connected by serial cable. I can access the terminal where appears the start of the antenna that ends with:
kernel panic - not syncring.....
Having no IP assigned (there is no 192.168.1.100, nor any other)
I have been uploading the firmware via telnet
with loadb command
the firmware
WNAP320_V2.1.1_firmware.tar
and others more updated with the same problem:
After three hours uploading the firmware and restarting the antenna.
the panic kernel reappears.
Help
Hello,
I solved this trouble with a doc made by 2019-02-11 05:21 PM
WNAP320 - Recovery Document.pdf
Many thanks.
But i need to do some more thinks.
Once the antenna firmware was recovered, I had to do a downgrade to 2.15 to be able to add it to the concentrator. And, "voila" the concentrator WC7520 has been able to add the antenna to the system
TNKS
3 Replies
Replies have been turned off for this discussion
Hello,
I solved this trouble with a doc made by 2019-02-11 05:21 PM
WNAP320 - Recovery Document.pdf
Many thanks.
But i need to do some more thinks.
Once the antenna firmware was recovered, I had to do a downgrade to 2.15 to be able to add it to the concentrator. And, "voila" the concentrator WC7520 has been able to add the antenna to the system
TNKS
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
