NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
M4300 PTP and boundary clock update
There was a post here regarding the M4300 PTPv2 and boundary clock and although replies answered *some* of the questions, not all were resolved; but the thread was closed. I would have replied to th...
Hello Rob,
Thanks for reopening this up and giving us a chance to address it because I know alot of the people using our switches out there are curious about this new feature.
Most of the M4300 switch series as of the latest firmware 12.0.9.3 support PTPv2 E2E transparent mode. This is the only addition that has been made to support PTPv2. There is currently no plan to add any more functionality to PTPv2. Models that do not support due to hardware limitation are M4300-24x24F, M4300-48X, m4300-48XF
For all other models, 1-step Transparent Clock mode using the residence time of the PTPv2 packet at the egress port level.
Thanks
Alex Pendleton
ProAV System Design Engineer.
NETGEAR
Hello Rob,
Thanks for reopening this up and giving us a chance to address it because I know alot of the people using our switches out there are curious about this new feature.
Most of the M4300 switch series as of the latest firmware 12.0.9.3 support PTPv2 E2E transparent mode. This is the only addition that has been made to support PTPv2. There is currently no plan to add any more functionality to PTPv2. Models that do not support due to hardware limitation are M4300-24x24F, M4300-48X, m4300-48XF
For all other models, 1-step Transparent Clock mode using the residence time of the PTPv2 packet at the egress port level.
Thanks
Alex Pendleton
ProAV System Design Engineer.
NETGEAR
NETGEAR Academy
Master AV-over-IP networking, multicast protocols, and troubleshooting to confidently deploy and manage AV networks.
Join Us!
