NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SRR60 router red led
From one day to the other my SRR60 router(used as a AP) doesn't work anymore. The led is white pulsing and the power led is green.
I tried an factory default but nothing happens when pushing the reset button a while where it should be flashing amber after a couple of seconds. So i tried the 30-30-30 second method. That works but results in only a red led flashing 4 times and becomes green again. Still no results in the browser for 192.168.1.1 and also no ping.
Last thing i tried is holding reset button while power on the srr60 until the led flashes red. At that time i have a ping on 192.168.1.1 and i could install the firmware again because i was thinking the FW became corrupt some how . Unfortunately after that no ping and no webpage anymore. The power led is green and the status led is pulsing white.
Is there someone with a good idea? Or do i get rid of my srr60 and 3 srs60
Thanks in advance
rgds, Paul
3 Replies
If the 30-30-30 reset process did bring the SRR back to operation and getting access to the setup web page, unit is probably gone bad and needs to be replaced.
The 30-30-30 process unfortunately did not bring back the SRR. Only thing was that the unit was pingable on 192.168.1.1 and i could update the (maybe)broken Firmware with success so that was a hopefull. Web page wasn't reachable.
It looks that all the 3 satellites (SRS) works okay without the SRR. Look to me that this is not normal.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
