NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

jdlr's avatar
jdlr
Aspirant
Jan 22, 2018

C6300 - Cannot perform firmware upgrade - GUI missing

Hello,

 

I am trying to do a firmware upgrade on my C6300 router.  I have tried going to this website for instructions:

https://kb.netgear.com/000053268/R6300v2-Firmware-Version-1-0-4-20

The site suggests that I go to administration tab and select the firmware button, but the problem is on my GUI I do not have this option.  I have also tried downloading the Netgear Genie application and this also does not work.  

I have seen on some forums that the ISP needs to perform the firmware upgrade, but the issue is, this is my personal router. 


Does anyone know a simple workaround to this issue?  Thanks!

Firmware

3 Replies

  • antinode's avatar
    antinode
    Guru
    Jan 22, 2018

    > I am trying to do a firmware upgrade on my C6300 router.

       Generally speaking, you can't.

          https://community.netgear.com/t5/x/x/m-p/1490471

    > I have seen on some forums that the ISP needs to perform the firmware
    > upgrade, but the issue is, this is my personal router.

       Doesn't matter.  You still can't.  If you search around, then you
    should be able to find similar responses from actual Netgear agents.

    > Does anyone know a simple workaround to this issue?

       Define "simple".  Contact your ISP.

    • jdlr's avatar
      jdlr
      Aspirant
      Jan 23, 2018

      Thanks for the reply.  So I purchased a router from bestbuy and I cannot perform upgrades because only a ISP, that shouldnt have access to my personal router, is allowed to...great product Netgear.

       

      With that being said, I am trying to connect this cable router directly to the coaxial feed from my Spectrum internet.  I was on the phone for 3 hours yesterday with tech support and the signal could not sync...it would lock in but would not sync, therefore I could not get internet connection.  The tech said that I should try to perform a firmware upgrade, since Spectrum says it should be at V2.01.22, when my current firmware is at V2.01.18 (src: https://kb.netgear.com/000036375/What-s-the-latest-firmware-version-of-my-NETGEAR-cable-modem-or-modem-router).

       

      Should I keep troubleshooting with Spectrum?