NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Running VirtualBox VM host on ReadyNAS Pro
What is VirtualBox?
So, I got bored while laundry was going... and decided to see how well a virtual OS would run on the Pro. My first choice of VM was VirtualBox, just cause I'm familiar with it after using it for ages, plus its open and free :) Eventually, I may look into VMWare as well.
After a bit of messing around, got it installed. Since the system is based off of Debian, was easy to get VirtualBox itself there (deb package). The trickiest part was getting the kernel modules required installed (see end of post).
In the end, I've got Windows 2003 R2 running on my Pro, interacting with it via RDP, and I am happy with the performance. I've added an extra 1GB memory (for a total of 2GB). I assigned 1GB of ram to my virtual OS, which still leaves the default configuration of 1GB for the NAS itself (which is more than enough still, 800MB+ is always cached).
I made a 10GB virtual disk to install the OS on. If I need more space later for extra applications, I can just add another virtual drive to that installation. And since I always like a bit extra security, I went a bit beyond the usual, and also have TrueCrypt running full disk encryption in the virtual OS. So no one can even boot and read the data in that OS without my bootup password.
I don't really have any screenshots to show, just a standard Windows installation. Here is a few of the steps I used while creating the VM on the console:
VirtualBox 3.1 has changed the CLI configuration. Until I update this how-to, please reference this: http://www.uhleeka.com/blog/2009/12/vir ... 9-04-host/
With the OS booted up and just sitting at the desktop, top reports:
Ad-hoc installation of VirtualBox. Should work for RAIDiator 4.2.4. Download links for the kernel modules, for those who don't want to go through the mess of compiling them.
So, I got bored while laundry was going... and decided to see how well a virtual OS would run on the Pro. My first choice of VM was VirtualBox, just cause I'm familiar with it after using it for ages, plus its open and free :) Eventually, I may look into VMWare as well.
After a bit of messing around, got it installed. Since the system is based off of Debian, was easy to get VirtualBox itself there (deb package). The trickiest part was getting the kernel modules required installed (see end of post).
In the end, I've got Windows 2003 R2 running on my Pro, interacting with it via RDP, and I am happy with the performance. I've added an extra 1GB memory (for a total of 2GB). I assigned 1GB of ram to my virtual OS, which still leaves the default configuration of 1GB for the NAS itself (which is more than enough still, 800MB+ is always cached).
I made a 10GB virtual disk to install the OS on. If I need more space later for extra applications, I can just add another virtual drive to that installation. And since I always like a bit extra security, I went a bit beyond the usual, and also have TrueCrypt running full disk encryption in the virtual OS. So no one can even boot and read the data in that OS without my bootup password.
I don't really have any screenshots to show, just a standard Windows installation. Here is a few of the steps I used while creating the VM on the console:
VirtualBox 3.1 has changed the CLI configuration. Until I update this how-to, please reference this: http://www.uhleeka.com/blog/2009/12/vir ... 9-04-host/
# Creating the Virtual Machine.
$ VBoxManage createvm -name "Windows2003" -register
$ VBoxManage modifyvm "Windows2003" -memory "1024MB" -acpi on -boot1 dvd -nic1 nat
$ VBoxManage createvdi -filename "/c/backup/VirtualBox/Windows2003.vdi" -size 10000 -register
$ VBoxManage modifyvm "Windows2003" -hda "/c/backup/VirtualBox/Windows2003.vdi"
$ VBoxManage registerimage dvd /c/backup/VirtualBox/Windows2003Ent.iso
$ VBoxManage modifyvm "Windows2003" -dvd /c/backup/VirtualBox/Windows2003Ent.iso
$ VBoxHeadless -startvm "Windows2003" &
# Connected via Remote Desktop at this point.
# After the installation, first page requires Ctrl-Alt-Del, so I sent the keycodes.
$ VBoxManage controlvm "Windows2003" keyboardputscancode 1d 38 53
# System is up and running, time to install GuestAdditions for better video, etc.
$ wget http://download.virtualbox.org/virtualbox/2.2.2/VBoxGuestAdditions_2.2.2.iso
$ VBoxManage registerimage dvd /c/backup/VirtualBox/VBoxGuestAdditions_2.2.2.iso
$ VBoxManage controlvm "Windows2003" dvdattach /c/backup/VirtualBox/VBoxGuestAdditions_2.2.2.iso
With the OS booted up and just sitting at the desktop, top reports:
top - 16:17:10 up 1 day, 17:58, 1 user, load average: 0.00, 0.01, 0.00
Tasks: 93 total, 1 running, 92 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.7%us, 0.2%sy, 0.0%ni, 99.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2072432k total, 2020100k used, 52332k free, 6120k buffers
Swap: 1048536k total, 144k used, 1048392k free, 784620k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10297 root 20 0 1104m 1.0g 4720 S 4 52.5 57:31.53 VBoxHeadless
12792 root 20 0 46092 9520 1720 S 1 0.5 59:54.51 motion
12196 root 20 0 9196 7688 980 S 0 0.4 0:57.72 wastesrv
1 root 20 0 1948 600 508 S 0 0.0 0:01.30 init
Ad-hoc installation of VirtualBox. Should work for RAIDiator 4.2.4. Download links for the kernel modules, for those who don't want to go through the mess of compiling them.
$ mkdir /lib/modules/`uname -r`/miscOr, if you want to compile the kernel modules yourself:
$ cd /lib/modules/`uname -r`/misc
$ wget http://www.readynas.com/contributed/chirpa/modules/virtualbox/pro/vboxdrv.ko
$ wget http://www.readynas.com/contributed/chirpa/modules/virtualbox/pro/vboxnetflt.ko
$ echo "deb http://download.virtualbox.org/virtualbox/debian etch non-free" >> /etc/apt/sources.list
$ wget -q http://download.virtualbox.org/virtualbox/debian/sun_vbox.asc -O- | apt-key add -
$ apt-get update
$ apt-get install virtualbox-2.1
$ /etc/init.d/vboxdrv start
envyious:/c/backup# echo "deb http://download.virtualbox.org/virtualbox/debian etch non-free" >> /etc/apt/sources.listInstall of VirtualBox 2.2.2, before Sun updates the Debian Repository...
envyious:/c/backup# wget -q http://download.virtualbox.org/virtualbox/debian/sun_vbox.asc -O- | apt-key add -
envyious:/c/backup# apt-get update && apt-get install build-essential
...
Setting up build-essential (11.3) ...
envyious:/c/backup# wget -q http://www.readynas.com/download/GPL/RNDP6xxx_4.2.4_WW_src.zip
envyious:/c/backup# unzip -q RNDP6xxx_4.2.4_WW_src.zip -d ./GPL
envyious:/c/backup# cd GPL/linux-x86-2.6/
envyious:/c/backup/GPL/linux-x86-2.6# make && make prepare
...
envyious:/c/backup/GPL/linux-x86-2.6# ln -s /c/backup/GPL/linux-x86-2.6/ /usr/src/linux
envyious:/c/backup/GPL/linux-x86-2.6# KERN_DIR=/usr/src/linux
envyious:/c/backup/GPL/linux-x86-2.6# apt-get install virtualbox-2.1
...
Setting up virtualbox-2.1 (2.1.4-42893_Debian_etch) ...
Adding group `vboxusers' (GID 101) ...
Done.
Messages emitted during module compilation will be logged to /var/log/vbox-install.log.
Success!
Starting VirtualBox kernel module: done.
envyious:/c/backup/GPL/linux-x86-2.6# cd
envyious:/c/backup/GPL/linux-x86-2.6# VBoxManage list vms
VirtualBox Command Line Management Interface Version 2.1.4
(C) 2005-2009 Sun Microsystems, Inc.
All rights reserved.
# wget -q http://www.readynas.com/download/GPL/RNDP6xxx_4.2.4_WW_src.zip
# unzip -q RNDP6xxx_4.2.4_WW_src.zip -d ./GPL
# cd GPL/linux-x86-2.6/
# make && make prepare
# ln -s /c/backup/GPL/linux-x86-2.6/ /usr/src/linux
# export KERN_DIR=/usr/src/linux
# apt-get install libfontconfig1 libglib2.0-0 libice6 libsdl1.2debian libsm6 libx11-6 libxcursor1 libxext6 libxi6 libxmu6 libxrandr2 libxrender1 libxslt1.1 libxt6 python2.4
# wget -q http://download.virtualbox.org/virtualbox/2.2.2/virtualbox-2.2_2.2.2-46594_Debian_etch_i386.deb
# dpkg -i virtualbox-2.2_2.2.2-46594_Debian_etch_i386.deb
Setting up virtualbox-2.2 (2.2.2-46594_Debian_etch) ...
Recompiling VirtualBox kernel module: done.
Starting VirtualBox kernel module: done.
441 Replies
Replies have been turned off for this discussion
- New VirtualBox 3.1 beta 1 has been installed successfully on 4.2.7 firmware
Changelog : http://forums.virtualbox.org/viewtopic.php?f=15&t=24458 - Can a VirtualBox VM get control of the USB disks attached to the ReadyNas? Could this be used to recover data from a ReadyNas using USB onto a x86 ReadyNas without having to copy data over a network?
- Just got it working on 4.2.8 with the instructions from page 9 with the odd version change. No problems experienced.
- So... I've tried to read through all of the posts here - and unfortunately for a newbie like me - way above my head.
Has there been any progress made on a "How-To" or an Add-On that I've seen mentioned every now and then?
Or perhaps at least a start HERE and do these things....?
Thanks all - you guys rock !. - Hi there,
After some mistakes and problems due to firmware changes offered by the v4.2.8, We successfully installed VirtualBox on 2 ReadyNAS Pro 6310 this Week-end with a friend of mine.
We used the Chirpa's step by step procedure found at page 9 and everything worked well (the make all step is quite loooooooooooooong ! lol) => thanks chirpa !
Then, we've tried to build our first VirtualMachine with VirtualBox v3.1.2 grabbed from the net and we've failed at some VBoxManage commands because they have changed since 3.0.x
The problem we met was that we couldn't attach the HDD/DVD to the virtualmachine. Later we found out why !
===> We needed to declare an IDE Controller and then attach the devices on it ! <===
OK said like that this seems to be a little bit "logic", but for 2 newbies of VirtualBox this wasn't ^_^
In fact, the "storage system" of VirtualBox have changed since 3.0 and here are the commands you need to do:
creation of the .vdi file !VBoxManage createhd --filename "</PATH/TO .VDI FILENAME>" --size <SIZE IN MB> --register
Creation of the Controller(s) <== Needed to attach some HDD or DVD/Floppy Drive laterVBoxManage storagectl "<VM NAME>" --name "IDE Controller" --add ide
... but you can also create a SATA Controller (faster than IDE). Note that it seems that we can only attach HDD to a SATA Controller. I didn't succes to attach a DVD Drive to the Sata ControllerVBoxManage storagectl "<VM NAME>" --name "SATA Controller" --add sata
Now that you've got your Controller(s), you must attach some device !
For example, the HDD attached to the SATA Controller, and the DVD Drive with an ISO to the IDE controller.VBoxManage storageattach "<VM NAME>" --storagectl "SATA Controller" --port 0 --type hdd --medium "</PATH/TO THE .VDI FILE DECLARED ABOVE>"
VBoxManage storageattach "VM NAME" --storagectl "IDE Controller" --port 0 --device 0 --type dvddrive --medium "</PATH/TO INSTALL ISOs>"
Earlier in that post, there were a remark about how to bridge the Network card of the VM to the Network card of the NAS. In v3.1.2 of VirtualBox, the argument changed again, no more use of "hostif"
To bridge the VM to a particular ethernet card of the NAS, the command is now :VBoxManage modifyvm "VM NAME" --nic<1-N> bridged --bridgeadapter<1-N> <Host Ethernet Device, usually eth0 or eth1>
Hope this could help those who, like my friend and I, are new to VirtualBox experience with the ReadyNAS Pro :p
@++
Dwarf - I'll try it out tonight with 4.2.9.
Dwarf wrote: Successfully upgraded to firmware 4.2.9 (I used the patch of super-poussin to remove php before the upgrade !)
No problem with VirtualBox v3.1.2, my WinXP VM is working nice after upgrade !
@++
Dwarf
Helloooooooo
I heard from Rom1 that 64bits system can't be installed ?
I think there's a compilation problem (forget the x64 options ?).
:)+- 64-bit should work, if you install the 64-bit VirtualBox installer.
edit: Need a CPU with VT-x. Notes here: viewtopic.php?p=213421#p213421
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
