NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Which apps are a must have for your NAS?
I'v kept my NAS fairly simple only having Plex and Piwigo installed. At the time of purchase, there was a trasition from OS 4.X to OS6.X so the app offerings were all over the place with a lot not being ported over to the new OS6. That said, looking at the availble apps from the GUI appears to have a significant number of apps being offered. I'll presume the apps are all functional and vetted by now so what apps are an absolute must for your NAS? More specifically, which ones would provide a better monitoring of the NAS other than the built in GUI performance tab.
TIA!
9 Replies
Replies have been turned off for this discussion
Linux-dash is probably the best for overall additional monitoring. For anything else, it all depends on what you want your NAS to do, with the processing power of your particular NAS being a potential issue. The lower powered CPU and less RAM the NAS has, the fewer apps you want to run.
I run very few apps, though I have a powerful rack-mount NAS. I have OwnCloud on an OS6 converted Pro2 (that mounts some shares from my primary NAS as read-only), and my main one runs DDClient and Zerotier. Both also run Eaton Intellegent Power Protector (IPP) and HDSentinel, which I installed via SSH. I use Zerotier instead of ReadyCloud for remote access (including remote backup, which ReadyCloud does not include) and DDClient because I need it for OwnCloud and remote access to my surveillance system and just never moved it to the Pro2 or surveillance system computer. Eaton IPP is unique to Eaton UPS's, providing a lot more info than the bult-in NUT, and I like the way i can have HDSentinel create drive summaries for my main and backup NAS, with the ones from the other NAS copied to the main one for review even when they are powered down.
I don't use Plex or ReadyDLNA because my media box can access media via SMB or NFS and I don't store anything that's going to need transcoding to watch/listen to.
Unfortunately, some of the apps are becoming a little long in the tooth. From what I have seen here, Netgear's support to app developers is abysmal, so I'm not surprised. Right now, for example, they cannot build anything for OS6.10.3 on an ARM system because Netgear "left out" required items from the development package. And similar things have happened before.
Note that there are also apps that are not available through the official Netgear path. Some are on GitHub (like ZeroTier) and WhoCares https://rnxtras.com/ is also very popular. He does charge a minimal fee to help offset keeping his site up, but it's quite reasonable and he does a bang-up job of keeping his apps up to date (when Netgear doesn't throw down obstacles). My OwnCloud installatrion is his version.
I also take a very minimal approach. My main NAS only has SMB Plus installed. SSH is enabled, and I installed iperf with that.
Overall, running a lot of apps can create issues when upgrading firmware. Some also can fill the OS partition - which can corrupt the NAS configuration. So I've decided to pair my NAS with an application server (a desktop PC that is always on, and has the NAS data volume mounted to a drive letter). That gives me more flexibility (since I can upgrade the PC and the NAS independently), and eliminates any risk of an app interfering with a firmware upgrade (or vice versa).
StephenB wrote:I also take a very minimal approach. My main NAS only has SMB Plus installed. SSH is enabled, and I installed iperf with that.
Overall, running a lot of apps can create issues when upgrading firmware. Some also can fill the OS partition - which can corrupt the NAS configuration. So I've decided to pair my NAS with an application server (a desktop PC that is always on, and has the NAS data volume mounted to a drive letter). That gives me more flexibility (since I can upgrade the PC and the NAS independently), and eliminates any risk of an app interfering with a firmware upgrade (or vice versa).
Agreed, minimal is best if you have other options but apps should not be overrunning the OS partition. Admittedly, I have limited knowledge of how the apps work with the Linux OS and whether or not they need to be installed in the same partition as the OS or if their data piece can be installed in a separate partition all together. Please excuse my ignorance either way. :smileywink:
I didn't realize there is a SMB Plus add-on but have been fine with the default SMB service native to the NAS. Although, I'm curious to what it offers above/beyond the standard offering. Right, I have SSH enabled as well but not iperf. I didn't see iperf in the app store so you must have done it manually which is intriguing. Again, I appreciate the feedback as it seems you and Sandshark are the only two on this forum at times. :smileylol:
Sandshark wrote:Linux-dash is probably the best for overall additional monitoring. For anything else, it all depends on what you want your NAS to do, with the processing power of your particular NAS being a potential issue. The lower powered CPU and less RAM the NAS has, the fewer apps you want to run.
Cool, I'll check out Linux-dash then. I don't need anything too fancy but more curious to what's out there. I use the ReadyNAS 626X model as my primary device so it should have plenty of CPU/RAM. Although, it is all stock at this point as I haven't needed to upgrade any of the components due to usage other than expanding the volume with larger hard drives.
I run very few apps, though I have a powerful rack-mount NAS. I have OwnCloud on an OS6 converted Pro2 (that mounts some shares from my primary NAS as read-only), and my main one runs DDClient and Zerotier. Both also run Eaton Intellegent Power Protector (IPP) and HDSentinel, which I installed via SSH. I use Zerotier instead of ReadyCloud for remote access (including remote backup, which ReadyCloud does not include) and DDClient because I need it for OwnCloud and remote access to my surveillance system and just never moved it to the Pro2 or surveillance system computer. Eaton IPP is unique to Eaton UPS's, providing a lot more info than the bult-in NUT, and I like the way i can have HDSentinel create drive summaries for my main and backup NAS, with the ones from the other NAS copied to the main one for review even when they are powered down.
Got it, sounds like your needs are much greater than my own but I agree with minimalistic approach of apps. Although, I do use NO-IP for DDNS but there's no need for a client since you can renew your IP once a month via email confirmation. I don't blame you for not using the ReadyCloud as some of the reviews (mostly about the app) are not kind even 4 years later.
I don't use Plex or ReadyDLNA because my media box can access media via SMB or NFS and I don't store anything that's going to need transcoding to watch/listen to.
Unfortunately, some of the apps are becoming a little long in the tooth. From what I have seen here, Netgear's support to app developers is abysmal, so I'm not surprised. Right now, for example, they cannot build anything for OS6.10.3 on an ARM system because Netgear "left out" required items from the development package. And similar things have happened before.
All my TVs in my house are capable of playing my movies direclty with ReadyDLNA but my wife/kids prefer a consistent platform for watching movies/shows and hence the need for Plex. I blame Netflix for setting that standard but to be fair Plex has worked very well over the last 4 years without any issues.
I'm sorry to hear that about the App store offering as you'd think it would be in full swing 4 years later from my original purchase of the NAS. Fortunately, I have an Intel chipset but not sure I want to go poking around testing apps just for giggles. As always, I appreciate the feedback!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
