NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
6.6.1 did not fix UPS detection problem
Still needed to unplug and re-plug USB cable to UPS after a restart for UPS to be detected. Wed Jan 18 2017 16:51:20 System: New USB UPS detected. Manufacturer: APC, Model: Back-UPS ES 550G, Seri...
I confirm the issue, I receive often an alert by email about UPS loose connection and then a new UPS found.
It's an old issue but stil present FW 6.6.1
I'm running 6.6.1 on an Ultra 6. No problems with my APS Smart UPS 1000
Your logs show that your UPS is detected fine.
Yes, after I manually unplugged the USB plug to the UPS at the back of the RN104 and plugged it back in to force a redetection. If I did a power-cycle or a restart now, the UPS would not be detected and I would need to unplug and plug the USB cable again to force it to detect. Hope this makes sense.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
