NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
LCD on NV+ shows volume not hostname.
Hi!
Maybe this issue has been condsidered in another thread but I don't find it.
In the LCD-display I can see the correct IP-address and volume size, but not the host name.
Is there any setting to change this?
I have a NV+ with firmware version RAIDiator 4.1.7-T42 [1.00a043], 4 x 2TB WDC WD20EARS-00S8B1.
In Frontview and RAIDar 4.3.0 all discs are present, but on the NV+ front the LED indicating disc 2 isn't lit.
Thanks in advance.
/P
Maybe this issue has been condsidered in another thread but I don't find it.
In the LCD-display I can see the correct IP-address and volume size, but not the host name.
Is there any setting to change this?
I have a NV+ with firmware version RAIDiator 4.1.7-T42 [1.00a043], 4 x 2TB WDC WD20EARS-00S8B1.
In Frontview and RAIDar 4.3.0 all discs are present, but on the NV+ front the LED indicating disc 2 isn't lit.
Thanks in advance.
/P
3 Replies
- The LCD will only show the IP, not hostname.
If FrontView/RAIDar shows Disk 2 healthy, it might be the LED board in the chassis having problems itself. You can contact technical support (numbers below) to inquire about a chassis RMA if needed. - I think that the LCD used to display hostname, but maybe that was changed in a RAIDiator update.
- It has always shown the Volume info and IP address.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
