NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
mounting ext3 filesystem as ext2
After a reboot, my NV+ no longer appeared on my network. I ran RAIDar and saw a BLUE circle icon and the text "File System Check, 100%" but the SETUP and BROWSE buttons were dimmed out. I logged in with a browser and the HEALTH was all green and LOGS didn't indicate any errors. I ssh as root to NV and found some error logs using dmsg. Anyone have any suggestions?
New = 0, source drives = f, current/active=4/4
:<6> hdc: unknown partition table
:<6> hde: hde1 hde2 hde3 < hde5 hde6 >
:<6> hdg: hdg1 hdg2 hdg3 < hdg5 hdg6 >
:<6> hdi: hdi1 hdi2 hdi3 < hdi5 hdi6 >
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdg1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
linked, 1000mbps mode
::::::::chn=2, statu/LP_S=0x(d0/d050)29, 32
chn=2, statu/LP_S=0x(d0/d050)29, 2
EXT2-fs warning (device hdg1): ext2_fill_super: mounting ext3 filesystem as ext2
2 Replies
- Looks like the two warnings are normal according to this post:
http://www.readynas.com/forum/viewtopic.php?f=20&t=25876
But still don't know why it is not showing up on the network (and BLUE in RAIDar). I downloaded all logs but am unsure which to look into. - I had an additional entry in fstab but the network was not up, so mount -a was forever stuck. Commented out the entry, reboot and all is good.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
