NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Nas is not booking after latest firmware update
After the firmware update it was fine up untill today were it failed to boot, the power light is just flashing (Im sure its just failing to boot)
I have tried to reinstall the OS but his did not work did a little more looking around and there was the OS6 Recovery Tool but can't get it to work, i can select everything else exept the Firmware image
Nas Type: RN102
Drive Space: 2X2TB
Firmware Update: 6.6.1
Thanks to anyone that can help
Just ask if you need anymore information
Then you didn't follow the USB Boot Recovery instructions. In any case this doesn't sound like an issue that USB Boot Recovery is likely to fix.
Have you been getting any SMART errors on your disks?
Have you tried powering down, removing your disks, hooking them up to your PC and testing them e.g. using SeaTools for SeaGate disks and WD Data LifeGuard Diagnostics for WD disks?
2 Replies
Replies have been turned off for this discussion
Then you didn't follow the USB Boot Recovery instructions. In any case this doesn't sound like an issue that USB Boot Recovery is likely to fix.
Have you been getting any SMART errors on your disks?
Have you tried powering down, removing your disks, hooking them up to your PC and testing them e.g. using SeaTools for SeaGate disks and WD Data LifeGuard Diagnostics for WD disks?On one of the disks but a have ordered a repalcement for it the other disk is fine
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
