NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Performance/Admin Page Access - Does available disk space affect access to the ReadyNas
Hi, I have a ReadyNAS NV+ and it has been running well for a while. A while back, I got a warning about the fan failing so I took the NAS out of commission for a while and got a replacement fan....
Are you using jumbo frames on your network?
It is a bit odd that you can't change the MTU. Perhaps try turning jumbo frames off, and do another test.
Hi StephenB.
Thanks for your quick response. I am running RAIDiator 4.1.14.
Below is the output from the NAStester app:
NAS performance tester 1.7 http://www.808.dk/?nastester
Running warmup...
Running a 400MB file write on \\nas\backup\test 5 times...
Iteration 1: 8.71 MB/sec
Iteration 2: 9.13 MB/sec
Iteration 3: 9.07 MB/sec
Iteration 4: 9.10 MB/sec
Iteration 5: 9.01 MB/sec
-----------------------------
Average (W): 9.00 MB/sec
-----------------------------
Any ideas?
Thanks.
These speeds are on a gigabit network?
Hi gt3,
Check if ticking the boxes from this article will improve the R/W performance of your ReadyNAS.
Hope this helps!
Kind regards,
BrianL
NETGEAR Community TeamIf the NAS data volume was created a long time ago, you might also look here: http://www.rnasguide.com/2011/06/22/why-you-might-want-to-factory-reset-a-sparc-readynas/
Even though the WD10EFRX is only 1 TB, it is still an Advanced Format drive (using 512e emulation). So I think 4K sector alignment will give the best performance.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
