NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Pro Pioneer no disks detected
Brought back to life about 4 months ago by ordering a new power supply (based on thread on this forum). Bought 2 new WD 6TB Red (not pro) disks and used two old 1.5 TB Seagate Barracuda drives. ...
It is possible that your power supply took collateral damage with it when it died. With luick, maybe just the drives. I would say that possibly you didn't get the Molex connectors in well enough on the SATA backplane when you changed the supply, but with just one or two drives, that sounds unlikely.
I'm not sure how you did an OS re-install with the drives removed, as that process writes the OS from flash to the drives. Assuming you didn't just mis-type that, try another drive. Any old size, just as a test. If you are using OS 4.2.x and the drive is used, put it in a PC and delete all partitions first. Even if using OS6.x, that can make things go smoother.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
