NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS NV+ lockups
I have an NV+ with the latest firmware (4.1.8) and 4 2TB WD Green SATA II hard drives (WD20EARS) in an X-RAID configuration. I primarily use the NAS to store movies, music, and TV shows that everybod...
Well, based on this, I took a stab at thinking channel 2 (drive 3) was the culprit:
and
So I pulled the drive and ran Western Digital's LifeGuard Diagnostics tool and did an extended test. Within a few minutes it had already reported bad sectors and asked if I wanted to try to repair them. I said yes, but it failed.
I preemptively ordered a new WD20EARS drive a couple of days ago, so when it comes in I'll fire it up and see if my problems are solved.
May 18 17:53:16 NAS kernel: SDW_STATUS on drive 0 = 0x50
May 18 17:53:16 NAS kernel: SDW_STATUS on drive 1 = 0x50
May 18 17:53:16 NAS kernel: SDW_STATUS on drive 2 = 0x51
May 18 17:53:16 NAS kernel: SDW_STATUS on drive 3 = 0x50
and
May 19 12:10:37 NAS kernel: ::hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }So I pulled the drive and ran Western Digital's LifeGuard Diagnostics tool and did an extended test. Within a few minutes it had already reported bad sectors and asked if I wanted to try to repair them. I said yes, but it failed.
I preemptively ordered a new WD20EARS drive a couple of days ago, so when it comes in I'll fire it up and see if my problems are solved.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
