NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Readynas RN 104 fails flashes when disks inserted
So today the drive stopped working and went into safe mode, I pushed the power button and it turned off but when it re-started it says there were no drives installed and had to connect with the defau...
It sounds like a power issue. The spin-up of the drives is overloading it. It could be the power brick itself (because the LED on it shouldn't ever flash) or one of the internal voltage regulators/converters, which are non-repairable.
HappyDave wrote:
Suspect the unit is close to dead but disks should be ok. Data isn't too valuable but would be nice to get it back. Do you know if I can just throw the disks into a new RN214 (if I can get one) and it would work?
It should.
Well I've just bought a 2nd hand 104 from CEX for £100 so fingers crossed!!
It sounds like a power issue. The spin-up of the drives is overloading it. It could be the power brick itself (because the LED on it shouldn't ever flash) or one of the internal voltage regulators/converters, which are non-repairable.
I did think the same, will try the brick from the replacement nas on the old box first to check. I'll update when I get it.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
