Spinpoint F4 HD204UI 2TB 5400 RPM working good so far

thanks mdgm.
i now have running 1 hitachi 2TB off the HCL and 2XSamsung F4s with 3.6T total
I plan on adding another samsung 2TB next week for a total of about 5.4TB

i factory reset the first three drives and everything looks ok but wanted to make sure i got 4K properly set up.
below is my partition log:
thanks again for all the help on the forums!


Disk /dev/hdg doesn't contain a valid partition table

Disk /dev/hdc: 2000.3 GB, 2000388448256 bytes
255 heads, 63 sectors/track, 243200 cylinders, total 3907008688 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/hdc1 32 4096031 2048000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/hdc2 4096032 4608031 256000 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/hdc3 4608032 3906992335 1951192152 5 Extended
/dev/hdc5 4608040 3906992335 1951192148 8e Linux LVM

Disk /dev/hde: 2000.3 GB, 2000388448256 bytes
255 heads, 63 sectors/track, 243200 cylinders, total 3907008688 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000000

Device Boot Start End Blocks Id System
/dev/hde1 32 4096031 2048000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/hde2 4096032 4608031 256000 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/hde3 4608032 3906992335 1951192152 5 Extended
/dev/hde5 4608040 3906992335 1951192148 8e Linux LVM

Disk /dev/hdg: 2000.3 GB, 2000388448256 bytes
255 heads, 63 sectors/track, 243200 cylinders, total 3907008688 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000000