NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Unable to get web admin page to come up
Hello. I am unable to get the web admin page working. I have found the IP address using the RAIDar software however there is no web admin page found when I type in the IP address. I recently u...
Users have been finding that factory resets on the 600 on recent firmware hasn't been working.
So the best solution would be to power down the 600, update a NV or NV+ to 4.1.8, after verifying the update was successful, power that unit down as well, remove drives from the NV or NV+ (label order), move the drives from the 600 to to the NV or NV+ running RAIDiator 4.1.8, do a factory default, then move the drives back again. See http://www.readynas.com/kb/faq/boot/how_do_i_migrate_disks_over_from_an_existing_readynas_to_another
Keep the order of both sets of drives the same. Doing a factory default on RAIDiator 4.1.8 gives 4k sector alignment which will be useful if you intend to update to using 2TB drives in the future.
So the best solution would be to power down the 600, update a NV or NV+ to 4.1.8, after verifying the update was successful, power that unit down as well, remove drives from the NV or NV+ (label order), move the drives from the 600 to to the NV or NV+ running RAIDiator 4.1.8, do a factory default, then move the drives back again. See http://www.readynas.com/kb/faq/boot/how_do_i_migrate_disks_over_from_an_existing_readynas_to_another
Keep the order of both sets of drives the same. Doing a factory default on RAIDiator 4.1.8 gives 4k sector alignment which will be useful if you intend to update to using 2TB drives in the future.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
