Unable to Login

---

StephenB wrote:

---

---

Dutto wrote:

However, I can't login right now when I use either of the IP addresses (192.168.1.10 and 192.168.1.11). They're both connected to the network, and I've just added a MK62 Nighthawk Mesh network. I'm using Windows 10 Pro.

Is this working as a router?  If is is, the IP addresses of the NAS might have changed.

 

---

Or if you had set up the NAS to use a static IP, then it's IP address is outside the range for the new router.  That's a common issue, which is why setting a static IP is usually a bad idea.  IP address reservation in the router is a better solution.

If that is the case, then you can temporarily use the old router again and go in and disable static IP, make a direct connection with a PC and do the same, or do an OS re-install, which will set it back to static IP and also reset the admin password to the default.  Just don't accidentally do a factory default, which erases all data.

FYI, a NAS is not a "set and forget" device, even if you have email alerts turned on.  You really should be "checking in" on it occasionally with at least RAIDar, but better the admin interface.  I do so weekly or more often, which is probably overkill.  But I wouldn't suggest anything less often than monthly.