UPS - Battery Backup / Installed New Batteries / How to clear "warning" message on Admin Page

Question

I had some batteries start to fail on my UPS Battery Backup.I replaced the batteries inside UPS.How do I reset / clear the UPS warning message inside The Admin Panel (Radair)?

StephenB · Answer

mlswayze&nbsp;wrote:
I had some batteries start to fail on my UPS Battery Backup.
I replaced the batteries inside UPS.
How do I reset / clear the UPS warning message inside The Admin Panel (Radair)?

It should have cleared itself.&nbsp; Did you try removing it, and adding it again.

mlswayze · Answer

Yes I removed the device, unplugged the UPS and re-installed.The message is still there&nbsp;

StephenB · Answer

mlswayze&nbsp;wrote:
Yes I removed the device, unplugged the UPS and re-installed.
The message is still there
&nbsp;

Have you tested the UPS?&nbsp;
&nbsp;
Maybe connect it to a PC and install vendor tools (PowerChute, etc).

Sandshark · Answer

It sounds like the UPS is still setting an alarm.&nbsp; Some (Eaton is one) have a battery timer that needs to be reset when it expires and you change the batteries.&nbsp;

Forum Discussion

UPS - Battery Backup / Installed New Batteries / How to clear "warning" message on Admin Page

4 Replies

Related Content

ReadyNAS Antivirus "WARNING: Local version: 0.103.2 Recommended version: 0.103.7"

R8000 - impossible to install

MR1100 battery issue

Installing Apps?

RS700 does not install new Netgear update

NETGEAR Academy

ProSupport for Business