NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
New Transmission 2.84 add-on for ReadyNAS Duo/NV+ (sparc)
This is a newly compiled version for the Duo straight from source. It has been configured with "--disable-nls --enable-lightweight --enable-utp" and the default web interface port of 9091.
If it doesn't work after installation, try rebooting.
Not sure if it can be install over the top of super-poussin's version, but if you are planning on uninstalling super-poussin's version then remember to save the torrent files somewhere else first.
To quote myself:
Thanks to super-poussin for the original Transmission add-ons.
Enjoy!
Transmission_2.73.bin - http://www.mediafire.com/?ajpyyc7ujv54o37 no-utp
Transmission_2.75.bin - http://www.mediafire.com/?gbmbhu3hrabf9fe
Transmission_2.76.bin - http://www.mediafire.com/?389i53w9w9rtosm
Transmission_2.77.bin - http://www.mediafire.com/?pm420vuajaim9bz
Transmission_2.80.bin* - http://www.mediafire.com/?5s7dag8ko72doj1
Transmission_2.81.bin* - http://www.mediafire.com/?x4pvvidrgb36df2
Transmission_2.82.bin* - http://www.mediafire.com/?rbctsdae000zoav
Transmission_2.83.bin* - http://www.mediafire.com/?31iul25i0t12qda
Transmission_2.84.bin* - http://www.mediafire.com/?rh5fge4mc8ahzw4
*if the "Upload" button doesn't work or the "Destination folder" field is blank, reload the webpage.
If it doesn't work after installation, try rebooting.
Not sure if it can be install over the top of super-poussin's version, but if you are planning on uninstalling super-poussin's version then remember to save the torrent files somewhere else first.
To quote myself:
tarobun wrote: It looks like upgrading from Transmission 2.42 to this Transmission add-on is a no-no. Sounds like there are conflicting configuration that screws up both installs. :( (eg. /c/addons-config)
It seems the best approach is to fully uninstall the old, delete the config directory, and then install this add-on. Once you're on this add-on, updating is straightforward and can be done over the existing version.
Just a fyi - the default download dir is /var/local/Downloads and there is no username and password with this add-on. If you are prompted for them then the old version was not fully uninstalled.
Thanks to super-poussin for the original Transmission add-ons.
Enjoy!
Transmission_2.73.bin - http://www.mediafire.com/?ajpyyc7ujv54o37 no-utp
Transmission_2.75.bin - http://www.mediafire.com/?gbmbhu3hrabf9fe
Transmission_2.76.bin - http://www.mediafire.com/?389i53w9w9rtosm
Transmission_2.77.bin - http://www.mediafire.com/?pm420vuajaim9bz
Transmission_2.80.bin* - http://www.mediafire.com/?5s7dag8ko72doj1
Transmission_2.81.bin* - http://www.mediafire.com/?x4pvvidrgb36df2
Transmission_2.82.bin* - http://www.mediafire.com/?rbctsdae000zoav
Transmission_2.83.bin* - http://www.mediafire.com/?31iul25i0t12qda
Transmission_2.84.bin* - http://www.mediafire.com/?rh5fge4mc8ahzw4
*if the "Upload" button doesn't work or the "Destination folder" field is blank, reload the webpage.
159 Replies
Replies have been turned off for this discussion
- Hi there,
I just upgraded to Transmission 2.81 and found out that I could enter the transmission web interface, but:
- all the downloads are gone from the overview (I probably have to add this manually?);
- New downloads won't start downloaden.
I have an open port, but the downloads just won't start, what can I do to fix this?
edit; strange.. it seems that the RPC port was still on 8181 in stead of 9091.. i changed this in the .json and one of the downloads works now... the other ones don't yet.... - Thanks for the donation. :)
Much appreciated! - umask 0 fixed it :)
I had cracked the shits woth Transmission and seriosuly considered upgrading to a newer unit, hoping that would fix the issues, don't have to now :)
Donation coming your way :) Thanks for putting the time into old units like these. Russell Coight wrote:
One problem though, I'm unable to delete any files/folders that transmission has downloaded, permission error. Permissions are nobody/nogroup.
Is there anything I can do?
Hmmm... not sure. That's the default permissions which is recommended by the transmission team to be "world-writable" (umask=0).
Maybe try playing around with the "umask" setting in the settings.json? Might need to do a bit of reading. :)- Just tested watch-dir and it works fine.
Make sure the directory exists and use
"watch-dir-enabled": true - Thank you very much for the 2.81 it run so well in my NV+ :)
However, did the watch directory function still working on 2.81?
Dose the following text still working?
"watch-dir": "/c/media/BitTorrent/sources/",
"watch-dir-enabled": 1
Thank you very much. tarobun wrote: To run from command line enter: cd /etc/frontview/addons/bin/TRANSMISSION
./transmission-daemon --logfile /var/tmp/transmission.log
To view log file:cat /var/tmp/transmission.log
Is now working :) Thanks for the help
In the log was:
Couldn't bind port 51413 on 0.0.0.0: Address already in use (Is another copy of Transmission already running?)
No version of Transmission was running, but the version that comes with the NAS was installed, so I deleted that and it worked.
One problem though, I'm unable to delete any files/folders that transmission has downlaoded, permission error. Permissions are nobody/nogroup.
Is there naything I can do?
thanks- Updated to version 2.81
Changes:
All Platforms- Fix 2.80 bug that showed the incorrect status for some peers
- Better handling of announce errors returned by some trackers
Web Client- Slightly better compression of png files
Also changed default download dir to /c/media/BitTorrent - It's a Linux path.
A path such as /c/media/BitTorrent or something like that would be better. tarobun wrote: It looks like upgrading from Transmission 2.42 to this Transmission add-on is a no-no. Sounds like there are conflicting configuration that screws up both installs. :( (eg. /c/addons-config)
It seems the best approach is to fully uninstall the old, delete the config directory, and then install this add-on. Once you're on this add-on, updating is straightforward and can be done over the existing version.
Just a fyi - the default download dir is /var/local/Downloads and there is no username and password with this add-on. If you are prompted for them then the old version was not fully uninstalled.
Well, having taken the radical action that I did, my Transmission v2.80 and RAIDiator 4.1.12 are still working having previously crashed very shortly after every start. Given that for me Transmission 2.42 did not work with RAIDiator 4.1.12 anyway - maybe for the same reasons - I'm just glad to have any version of Transmission working again.
The path quoted is not quite what mine had which was '/var/local//Downloads' which has // - I don't know what that means but it doesn't look right.
Yes, the path does look like a Mac path but as has been said, it comes up by default.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
