NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
.net FTP client cannot connect to readyNAS FTP Server
Hi all, We have some software written in .net for some equipment that uploads data to an FTP server. I can connect to the NAS with a Filezilla client however I am unable to connect with the .net ...
Is the filezilla server also using the same DNS/DDNS name?
Check that the passive port range for FTP is configured reasonably on the NAS (2-4 passive ports per simultaneously connected device) and that those ports are opened in the firewall. Port numbers should be between 49152 and 65535.
Masquerading might also need to be on if there is a NAT router on the path. The Filezilla client doesn't need that setting but other clients do.
I have, they all connect to the Filezilla server no problem at all.
The devices are all remote.
There is limited config available. Username, Password and path.
Cheers.
Is the filezilla server also using the same DNS/DDNS name?
Check that the passive port range for FTP is configured reasonably on the NAS (2-4 passive ports per simultaneously connected device) and that those ports are opened in the firewall. Port numbers should be between 49152 and 65535.
Masquerading might also need to be on if there is a NAT router on the path. The Filezilla client doesn't need that setting but other clients do.
Well this is a little embarrassing, having a comma instead of a full stop in the IP address of your Masqueraded IP will do it everytime!! Stupid fat fingers..
Thank you StephenB, you at least pointed me in the right direction to find the I D 1 0 T error.Cheers.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
