NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
6.6.0 Cant Access Admin Page, Device keeps crashing/hanging
Hello, for the last little while, I have had trouble accessing the Admin Page on my readyNas 104 using version 6.6.0. My current set up is as follows; -4x 3TB Western Digital Red Drives running in...
We've changed a backend setting. Let us know if this makes a difference.
Hi Framer, logs were sent as per the instructions on the website. I noticed that there are quite a few files within the zip file of the logs. When I read them myself, which ones should I be concentrating on for these sorts of problems?
Thank you,
Logs were sent the same day.
Cheers
Hi philipGood,
I would normally check the drives/disks first if there are re-allocated sectors or ATA errors. Thanks for sending the logs.
Might be best for you to back-up your files on another drive (USB, PC).
Regards,
Hi philipGood,
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The Netgear community looks forward to hearing from you and being a helpful resource in the future!
Regards,Hi Framer, unfortuntely, the problem is persisting. The data on the drives re accessible, however, the admin page rarely works. Ive hard rebooted 3 times only to have the boot sequence get stuck at either 98 or 99%. It stays like this for over an hour and never seems to recover.
The few times I've managed to get into the admin section, I've removed all apps and antivirus running on the unit. Therefore, there only thing running at this time is the drives themselves. No apps, no add ons. Despit this, I still seem to get stuck in the bot sequence at either 98 or 99%.
Hi philipGood,
Could you try doing a back-up of your files, then remove some from the ReadyNAS? Try to have the capacity below 80%. Then try accessing the GUI again.
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
