NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Enabling Jumbo Frames breaks Frontview
I have same issues with my ultra 2. After enabling jumbo frames, front view wont finish loading until i do an OS reset. This has happened sometimes and other times it is ok. There have been other...
What version of RAIDiator are you running?
Have you enabled Jumbo Frames on your PC's NIC and on your router/switch? Have you verified that your router/switch and PC's NIC support Jumbo Frames? Are your PC's NIC drivers up to date?
Are you using Cat5e or newer ethernet cables?
Also some routers/switches and PC NICs may support Jumbo Frames but not the full 9000 MTU. You could try setting a smaller MTU than 9000.
Is you client PC/Mac connected via ethernet or wireless to your network? If by wireless do you still get the issue if connected via ethernet?
Have you enabled Jumbo Frames on your PC's NIC and on your router/switch? Have you verified that your router/switch and PC's NIC support Jumbo Frames? Are your PC's NIC drivers up to date?
Are you using Cat5e or newer ethernet cables?
Also some routers/switches and PC NICs may support Jumbo Frames but not the full 9000 MTU. You could try setting a smaller MTU than 9000.
Is you client PC/Mac connected via ethernet or wireless to your network? If by wireless do you still get the issue if connected via ethernet?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
