NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Failure with smb or iscsi connection ReadyNAS 214
Firmware 6.6.1
When we are uploading files to NAS via SMB or to vdisk via iscsi connection after few minutes uploading connection faild.
No any messages in logs, it will work again after reboot.
Logs availible on link below
6 Replies
Replies have been turned off for this discussion
AV is disabled
The logs show that AV is already disabled.
Perhaps try disabling IPv6.Also your NAS is showing a 100Mbit connection. Are you using a 100Mbit router/switch? Can you try using a gigabit router/switch and see if you still have the same problem?
If not already done, try to install the app "SMB plus" and set the parameters as follows
SMB Version -> SMB3
Oplocks -> disable
Preallocate -> enable
Hide unreadable -> disable
Hide unwriteable -> disable
Restrict anonymous -> disable
SMD encrypt -> auto
SMB signing -> disabled
Good luck :-)
The app is running fine on my two NAS (RN104 and RN204) since beginning of (2014; 2016) and seems also not to misbehave under fw 6.6.1
Interresting topic!
Thanks i will try it.
At this moment we cut max size of the lunes after this it has been working for last week without problems.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
