NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
miogpsrocks
May 20, 2015Tutor
File system check 100% of last 24 hours
Hello. I have an older Readynas X6/600/TERANAS system and I think it maybe have had a power outage happen when it was on. It restarted with the checking file system and now its 100% complete...
miogpsrocks
May 23, 2015Tutor
mdgm wrote: I would try booting the NAS with disk 1 replaced with a brand new disk that has no partitions on it.
Ok, I did exactly that.
Here is what is going on now. For the first 5-10 minutes, the RAIDar software still shows File System check 100% which happen in a few minutes. All the way to the left, there is a blue dot which is the same as before and both the " Setup and browse" buttons are grayed out. This is exactly the same as before the drive switch.
However, the machine itself has " Drive #1" flashing relatively quickly, the activity light is flashing even quicker than the Drive#1 light and the power light is slowly pulsing between dim and bright for the first 5 minutes. Now the power light is solid.
Both Drive #1 and activity light are flashing.
After the first 5-10 minutes,
RAIDar software, the button all the way to the left has turned " Yellow" the "Volume status" button is blinking green, and the first light on Disk status is blinking green.
*Update, I am now able to access the files and folders. I am also now able to access the web admin screen.
Resync in progress.
When I click on Volume, it said " Status: Resync 1% complete, Time to finish 7470722 hr 55 min, Speed 0 KB/sec"
That is an odd amount of time to complete. Do you think its not actually rebuilding the drive? Maybe its formatting the drive first which is why the resync is currently at " Speed 0 KB/sec"
*Update, now it said " Status: Resync 3% complete, Time to finish 3060215 hr 50 min, Speed 0 KB/sec"
So its becoming more complete even though the speed is still 0KB/sec. I hope this means its formatting the drive before the rebuild.
A quick view of the logs, I think the time stamp may be a little off. : I must say that I am surprised, I did not know this unit had all these alerts. I usually just turn in on once in a blue moon grab a file and turn it off. I am going to need to setup email alerts on all my systems without exception after this incident.
Fri May 22 18:02:07 PDT 2015 System is up.
Wed Jan 1 16:19:42 PST 2003 ATA error count has increased in the last day. Disk 1: Previous count: 0 Current count: 4 Growing SMART errors indicate a disk that may fail soon. If the errors continue to increase, you should be prepared to replace the disk.
Wed Jan 1 16:19:08 PST 2003 Volume C is approaching capacity: 100% used 17G available
Wed Jan 1 16:18:42 PST 2003 RAID sync started on volume C.
Wed Jan 1 12:24:21 PST 2003 RAID sync started on volume C.
Wed Jan 1 12:22:00 PST 2003 Volume scan found and corrected errors.
Wed May 20 19:14:21 PDT 2015 RAID sync started on volume C.
Wed May 20 09:53:34 PDT 2015 RAID sync started on volume C.
Tue May 19 15:45:32 PDT 2015 RAID sync started on volume C.
Tue May 19 15:38:14 PDT 2015 Volume scan found and corrected errors.
Sun Dec 28 01:07:12 PST 2014 System powering off...
Wed Dec 24 23:08:17 PST 2014 A SATA reset has been performed on one or more of your disks that may have affected the RAID parity integrity. It is recommended that you perform a RAID volume resync from the RAID Settings tab ( accessible in the Volumes page => Volume tab in FrontView ). The resync process will run in the background, and you can continue to use the ReadyNAS in the meantime.
Wed Dec 24 23:06:45 PST 2014 System is up.
Fri Dec 19 00:10:21 PST 2014 Powering off device
Fri Dec 19 00:10:21 PST 2014 Please close this browser session and use RAIDar to reconnect to the device after it is powered back on. System powering off...
Thu Nov 27 09:23:44 PST 2014 System is up.
Tue Aug 12 06:45:00 PDT 2014 Powering off device
Tue Aug 12 06:44:58 PDT 2014 Please close this browser session and use RAIDar to reconnect to the device after it is powered back on. System powering off...
Mon Jan 13 17:47:10 PST 2003 System is up.
Wed Jun 11 09:51:47 PDT 2014 Powering off device
Wed Jun 11 09:51:46 PDT 2014 Please close this browser session and use RAIDar to reconnect to the device after it is powered back on. System powering off...
Thu Apr 24 01:42:01 PDT 2014 System is up.
Thu Apr 24 01:40:19 PDT 2014 Volume scan found no errors.
Wed Apr 23 23:25:52 PDT 2014 Rebooting device...
Wed Apr 23 23:25:51 PDT 2014 Please close this browser session and use RAIDar to reconnect to the device. System rebooting...
Wed Apr 23 19:43:25 PDT 2014 System is up.
Tue Dec 31 18:37:26 PST 2002 Volume scan found and corrected errors.
Wed Apr 23 14:31:50 PDT 2014 Powering off device
Wed Apr 23 14:31:49 PDT 2014 Please close this browser session and use RAIDar to reconnect to the device after it is powered back on. System powering off...
Wed Apr 23 06:16:00 PDT 2014 RAID sync finished on volume C. The volume is now fully redundant.
Tue Apr 22 20:37:08 PDT 2014 System is up.
Tue Apr 22 12:44:15 PDT 2014 RAID sync started on volume C.
Tue Apr 22 12:43:54 PDT 2014 Volume scan found and corrected errors.
Tue Apr 8 13:29:56 PDT 2014 System is up.
Here are the details log files if you are interested.
http://1drv.ms/1IQwTaH
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!