NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
LACP no longer working on RN516 running 6.7.5
LACP bonding no longer seems to work with my RN516 on 6.7.5, the switch shows only one interface up, as if the teaming is Active Backup, not LACP. The MTU keeps resetting to 1500 from 9000, as if th...
Hello Tonkinite,
Was teaming mode working fine before and the problem just recently occured? Did the NAS encounter anything on the network that may have cause this behavior of the NAS. You may check this thread for additional information.
Regards,
Marty_M
NETGEAR Community Team
Hello Tonkinite,
There is no specific information on the release notes of firmware version 6.8.0 about the teaming/bonding on the NAS. The 6.8.0 firmware version had been already officially release you may want to try it and check if it will make any difference.
Regards,
Marty_M
NETGEAR Community Team
Changed the teaming mode to Round Robin, which seemed to allow the Jumbo frame MTU to stick, even after switching back to LACP, but the switch still only shows one line active (but the opposite one now).
Tried to manually install 6.8.0, it failed with "Unrecognized server error", even though it's a local install.
Tonkinite wrote:
Tried to manually install 6.8.0, it failed with "Unrecognized server error", even though it's a local install.
That one's new to me (and I haven't seen that error with my NAS). What browser were you using? At what point in the process did it fail?
StephenB wrote:
Tonkinite wrote:
Tried to manually install 6.8.0, it failed with "Unrecognized server error", even though it's a local install.
That one's new to me (and I haven't seen that error with my NAS). What browser were you using? At what point in the process did it fail?
It's not new to me anymore :smileyfrustrated: I just saw it when installing the firmware on my RN526. Though I didn't see it on the RN524 I upgraded yesterday.
fwbroker didn't generate that error though, so I used that.
Hello Tonkinite,
Upgrading the firmware did not make any difference and the problem persists. Can you please give us a copy of the complete logs of the NAS, you may use any file sharing website like wikisend and just PM the download link.
Regards,
Marty_M
NETGEAR Community TeamHave moved Zip of logs to DropBox, will post a link to you as a private message.
If you find anything of concern, please let me know.
Thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
