NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
No access to admin page after 6.9.3 update
I just updated the firmware on my RN31400 from 6.9.2 to 6.9.3 and now I cannot access the adim page through my browser. It is not a browswer cache problem, that has been cleared multiple times. When ...
I have to give a big thank you to StephenB for his suggested resolution for my problem. After backing up all of my data, I used the OS reinstall option from the boot menu and left the Ready NAS connected to the Internet for about ten minutes as mgdm had suggested and the problem with accessing the admin page was fixed!
In the process of becoming more educated about my Ready NAS 314, I suddenly realized that if I had just tried the second ethernet port on the 314 which was still set to use DHCP, I would not have had to do the OS Reinstall, I could have simply plugged into my router for the required Internet connection.
Thank you to all that replied and offered suggestions to my problem which seems to be a common one unfortunately.
Did you try rebooting the NAS?
GWKJR wrote:
I have read the suggestion about connecting to the Internet to access hotfixes, but my unit has addressing for my private network.
Can you explain what you mean by this?
If your unit is using DHCP, then it should have access to the internet through your router (even though it is using local IP addresses). Is that what you are using, or have you configured a static IP address in the NAS?
Also, did you set up firewall rules to block internet access in your router?
My NAS unit is using a static IP address for my network. The unit is currently connected to a switch in my private network not a router. Thank you for your questions.
Regards
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
