NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
NSR NAS - Adding HDD of another Capacity
Hi,
I have a Negear ReadyNAS RN10400 - 4bay and wanted to know if it is possible to add HDD's of different capacity.
I have 2x 5TB Western Digital (Red) - Intellipower SATA 6 Gb/s 64 MB Cache 3.5 inch drive already configured to JBOD mode and wanted to now if it was possible to add another two HDD's of different capacity e.g. 3TB , 6TB, 10TB. I am looking to upgrade to 6TB x 2.
I have read a similar forum, but wanted to check if it was still applicable with an older model
Thank you
Jamie
Jamie2 wrote:
Hi Stephen,
Can I still add 2x 6TB in to the remaining bays using JBOD and create seperate volumes for each ?
Yes. Hot-insert the disks, and create the volumes on the volumes tab.
You'll then need to create shares on those volumes.
Frontview backup jobs are handy for for copying shares to the new volumes. You'll need to create a temporary share, then create a backup job. After it completes, check the new share. Then delete the original, and rename the temporary share as desired.
Ideally you'll approximately balance the free space on each volume (making sure that no volume gets too full).
8 Replies
Replies have been turned off for this discussion
Yes. You should be in flexraid already (since you are running jbod).
So you could add additional disks as jbod (one per volume).
Jamie2 wrote:
I am looking to upgrade to 6TB x 2.
Are you wanting to upgrade your current disks or add new ones?
With JBOD you can't expand the volume size. You'd need to
- destroy a volume
- remove its disk(s)
- insert new disk(s)
- create a new volume
This if course destroys any data on the volume.
Hi Stephen,
Thank you for your reply. I am looking to add another two disks , seperate volumes.I was asking the question because someone once told me that if you have a Negear NAS you have add addional disks with the same capacity. I will purchase a new HDD 6TB and add a new volume, I will also make sure that the HDD is the same speed as the other drives.
Thank you fotr your help.
Jamie
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
