NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Cannot create new share and all existing shares inaccessible
Hi, We have two ReadyNAS 4220s (NAS01 and NAS03). NAS01 has filled up so I created a new share on NAS03 and copied folders and files over from NAS01. The copy went fine and I was able to browse th...
The final piece in the puzzle to get the NAS working again was to manually restart Samba and Winbind.
Once those two services were restarted all my AD permissions came back, shares were accessible and the admin page works.
Luckily these devices will be de-commissioned by the end of the year.
markwhitmarsh wrote:
Is it possible to do a clean shutdown at the unit itself or will I just have to pull the power out?
My ReadyNAS are all desktop models, but the hardware manual for rackmounts says you can. http://www.downloads.netgear.com/files/GDC/RN2120/ReadyNAS_OS6_Rackmount_HWM_EN.pdf
To gracefully shut down your system using the Power button:
- Press the Power button on the front panel of the system. The Power LED blinks, prompting you to confirm the shutdown.
- Press the Power button again.
The system shuts down gracefully
Of course yours isn't acting normally, and you might end up pulling the plug.
Well, after a hard power off we're back in business - almost...
The controlled shutdown using the power button isn't an option on the 4220 so I had to just push and hold the button until it shutdown.
After the reboot I could SSH onto the box and found the 4GB system volume only had a few hundred Kb free space. I'd made a mistake either with my scp or rsync command when I was trying to copy files from one NAS to the other. The offending file was deleted and now the admin page is accessible again.
However, all my AD permissions have vanished and MPNAS03 can't sync to AD any more to retrieve users and groups. MPNAS01 is fine so I made sure all the parameters were the same on both NAS boxes but no dice.
I downloaded the logs and in the ads.log file I see this error message:
Fail to insert $home_folder/$user/$group/$group_has_user: Internal DB error. (2410:11:database disk image is malformed)
Also, I can't make any changes to the authentication settings because of this error:
Backup tables failed
I'm losing my patience with this thing!
The final piece in the puzzle to get the NAS working again was to manually restart Samba and Winbind.
Once those two services were restarted all my AD permissions came back, shares were accessible and the admin page works.
Luckily these devices will be de-commissioned by the end of the year.
Hello markwhitmarsh,
Thank you for updating the topic you started with what resolved it.
To close the topic, mark the post that has the solution as accepted solution.
Feel free to post any questions, comments or suggestion. Thank you for your contribution to the community!
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
