Forum Discussion

Aspirant

May 03, 2018

ReadyNas 102 fails to load admin page after latest firmware upgrade

system Hi all. Got myself in a little bit of a pickle. Had my Readynas sind 2015 and apart from a few minor issues all has been working well.... till now. I recently discovered that one of my 3tb h...

ReadyNAS OS 6 on Legacy models

JohnCM_S

NETGEAR Employee Retired

May 03, 2018

Hi PC1staid,

You may try first clearing the web browser cache, then close and re-open the browser, and see if you will be to access the admin page.

Regards,

PC1staid
Aspirant
May 04, 2018
JohnCM_S wrote:

Hi PC1staid,

You may try first clearing the web browser cache, then close and re-open the browser, and see if you will be to access the admin page.

Regards,

Hi, I have tried this on all three browsers I have on my system, also I get the same results on an iMac. I have just done a clean install on a customers PC, attempted the login again with the same result on I.E. and Edge. Am I able to do a roll back via the 6.5.2 on a USB stick plugged dirrectly into the 102? I have read firmware updates can be done this way, just not sure if a downgrade can be done.

Thanks.

Marc
mdgm-ntgr
NETGEAR Employee Retired
May 04, 2018
You should not downgrade to firmware prior to 6.9.0. There is something else that should be tried before resorting to attempting to downgrade the firmware.