NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS 3200 alerts
Hi,
I recently upgrade CPU of my ReadyNAS 3200 and now the alert system don't work properly. The system is continually sending alerts:
VCOR la alimentación está fuera del intervalo normal [esperado: 1.34 actual: -0.00].
V+12 la alimentación está fuera del intervalo normal [esperado: 12.00 actual: -0.01].
V3_3 la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
VDIM la alimentación está fuera del intervalo normal [esperado: 1.80 actual: -0.00].
V5_0 la alimentación está fuera del intervalo normal [esperado: 5.00 actual: -0.00].
V-12 la alimentación está fuera del intervalo normal [esperado: -12.00 actual: -47.54].
3VSB la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
VBAT la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
And don't show correct fan rotation speed.
What the problema is? Can I do something to correct it?
Thanks in advance
I recently upgrade CPU of my ReadyNAS 3200 and now the alert system don't work properly. The system is continually sending alerts:
VCOR la alimentación está fuera del intervalo normal [esperado: 1.34 actual: -0.00].
V+12 la alimentación está fuera del intervalo normal [esperado: 12.00 actual: -0.01].
V3_3 la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
VDIM la alimentación está fuera del intervalo normal [esperado: 1.80 actual: -0.00].
V5_0 la alimentación está fuera del intervalo normal [esperado: 5.00 actual: -0.00].
V-12 la alimentación está fuera del intervalo normal [esperado: -12.00 actual: -47.54].
3VSB la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
VBAT la alimentación está fuera del intervalo normal [esperado: 3.30 actual: -0.00].
And don't show correct fan rotation speed.
What the problema is? Can I do something to correct it?
Thanks in advance
8 Replies
Replies have been turned off for this discussion
- You might have more success posting in the ReadyNAS forum - but my suspicion is that you are using an "non-supported" processor...
http://www.readynas.com/forum/ - What CPU did you put in it?
We don't support CPU upgrades.
Did you connect the fans etc. back up correctly. - I upgraded a Intel Core Duo E7400 to a Intel Core Quad Q9650. I have not touched anything else than CPU.
- Well our config for the 3200 would be based on the stock CPU so with the different CPU behaving differently that would explain why you are getting the alerts.
Could you send me your logs: http://www.readynas.com/kb/faq/misc/how_do_i_send_all_logs - Hi, I have sent the logs yesterday, could you see anything?
- It looks like you are getting those errors due to changing the CPU. Our software is hard coded to expect the output given from the stock CPU.
- So, is not possible to solve the problem?
- Perhaps post on the ReadyNAS forums and see if any of the users there have suggestions.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
