NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Duo V2: SNMP: No Response
I have enabled SNMP on my ReadyNAS with the following parameters: Community: public Hosts allowed access: 192.168.0.10 In SNMPD.CONF on ReadyNAS the following lines are present: com2sec rea...
I found the root cause of the issue.
I needed to change the line
com2sec readonly 192.168.0.10 public
to
rocommunity public 192.168.0.10
and restart the SNMP task with "service snmp restart".
Afterwards I was able to successfully connect via SNMP to that device.
However: It seems that this type of NAS only supports a basic subset of SNMP IDs so that I am e.g. unable to read temperature, fan status, RAID status etc. so for me it does not make sense to monitor it :-(
I needed to change the line
com2sec readonly 192.168.0.10 public
to
rocommunity public 192.168.0.10
and restart the SNMP task with "service snmp restart".
Afterwards I was able to successfully connect via SNMP to that device.
However: It seems that this type of NAS only supports a basic subset of SNMP IDs so that I am e.g. unable to read temperature, fan status, RAID status etc. so for me it does not make sense to monitor it :-(
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
