NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readys NAS nv+ destroys my hard drives
i have 2x1.5tb and 2x2tb hard dirves which i set the nas to erase so i let it do the job and when i can back to it
it sayed it had been done but for some reason only 1 of my hard drives is usable and i cant read nor format the other 3
nas says there bad but i hung then in a Linux system which says there are healthy.
it sayed it had been done but for some reason only 1 of my hard drives is usable and i cant read nor format the other 3
nas says there bad but i hung then in a Linux system which says there are healthy.
14 Replies
Replies have been turned off for this discussion
- Check your PM inbox
- i did factory reset with the one good hard drive in each of the nas bays all installed without any issues
- Perhaps one of the other disks has a problem.
wheelhouse20 wrote: i didn't get any notifications regarding HDD failures also none of the disk diagnostic tools picked up my hard drives
2x1.5tb HD154UI
2x2tb WD20EZRX
So the nas will work normally as long as you use only a certain one of the original disks, and you were unable to get vendor tools to recognise any of the other 3 original disks?
It seems unlikely , but perhaps all 3 of the other disks are in fact, as the nas has suggested, bad.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
