NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND2000 v2
Hi. I wanted to insert second hdd to nas. Raidar 6.3 cant do raid 0 or jbod, I had to use raidar 4.3.8. But after reboot second hdd lost from system. After that, I insert hdd in PC to check for corruption, but I see a screen with invitation to insert password. And after that first hdd also stop work - after reboot nas start setup mode. And first hdd also began to demand password on PC. Maybe nas lock hdd in procces of erase - maybe I start erase, but did not wait for the end. Did nas have default password for hdd? Or this is damage of nas?
I find the answer by typing "netgear lock hdd" in google
10 Replies
Replies have been turned off for this discussion
Did you do accidently do a secure erase on one of the hard drives? Maybe try putting them back into the NAS, and power up for about 5 minutes or so.
I generally suggest starting with only one disk inserted, and then set it up as flexraid/jbod. Then add the second disk as a second volume after setup.
"secure erase" - is this point "erase" in setup in raidar?
One time Im not wait for the end of erase, just reboot nas. Second time I start and after few hours nas hang up - didnt answer from net.
Now I start it again with one disk.
Nas do erasing more then 9 hours, the lights is on, but raidar did not see the device.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
