NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RNDP6310 stuck in "BOOT MENU"
Hi, I've just had a user bring an RNDP6310 to me not-working. His response to my suggestion "That's OK. Just flatten it and restore the data from your backup" was the predictable "I don't have a ba...
Thanks, I conducted some more tests and found the following:
I swapped the RAM between the slots and tried each of the sticks on its own in one slot. No improvement.
I removed the daughter board containing the network ports and the reset button.The unit failed to boot without the board but the symptom was different (It got stuck on "ReadyNAS" and not on "BOOT MENU")
I measured across the reset button pins and it measured 94 ohms open and 0 ohms closed. 94 seems quite low but I don't know what other components are across the circuit.
I'm building a console cable now to see if there's any meaningful output when it gets stuck.
I swapped the RAM between the slots and tried each of the sticks on its own in one slot. No improvement.
I removed the daughter board containing the network ports and the reset button.The unit failed to boot without the board but the symptom was different (It got stuck on "ReadyNAS" and not on "BOOT MENU")
I measured across the reset button pins and it measured 94 ohms open and 0 ohms closed. 94 seems quite low but I don't know what other components are across the circuit.
I'm building a console cable now to see if there's any meaningful output when it gets stuck.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
