NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Sata interface spec?
Back in the old days of ReadyNAS, most all of the SATA hard drives used a 3GB/sec interface speed. Now I see SATA hard drives touting 6GB/sec interface speeds. WUP? Do these 6GB/sec drives still 'ta...
Currently 3GB/s is more than enough for harddrives, you wont even notice a difference between 1,5GB/s SATA-I and 3GB/s SATA-II.
Also all SATA standards are fully backwards compatible, so SATA-III SSD for example will run Happily on SATA-I, only difference would be speed.
HDD`s are different story, fastets ones can only reach about 190MB/s sequential read, so SATA-II is more than adequate.
Also all SATA standards are fully backwards compatible, so SATA-III SSD for example will run Happily on SATA-I, only difference would be speed.
HDD`s are different story, fastets ones can only reach about 190MB/s sequential read, so SATA-II is more than adequate.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
