NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Slow factory reset RN214 with 3 x 1TB drives
I'm swapping from a NV+ to a RN214. All old data is backed up on USB external drive. I put the 3 1TB drives from the NV+ in the 214 and started the factory reset. 24 hrs later it had only resync'd ...
It's not normal to take a week to complete. And you should be able to access the admin ui via http://nas-ip-address/admin
If you let it complete, be sure to check the SMART stats before you use the volume.
MMcD3v1 wrote:
Ps I first tried it with 4 drives. One brand new 1TB drive and the 3 from the NV+ but it kept throwing off a boot operation error.
Were you following the boot menu instructions to do a factory default? (page 57-58 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/ReadyNAS_%20OS6_Desktop_HM_EN.pdf )
Yes I followed. after I pulled the brand new disk it worked. Very quickly went to the 10min countdown and then started.
I have gotten into the NAS and all shows greenOnly at 14.8% now. 158hrs to finish per Systems/Volume tab - blue dialogue box on left. On the Systems tab, in the Overview, Volume and Performance subtabs all looks green. In Volume tab, the 3 drive have green lights. When clicked on each of the 3 drives, I gets a text box that doesn't appear to show anything bad.
However, On another thread, I saw a graph of system performance. I can't seem to find that to see what the CPU might have running as well.
MMcD3 wrote:
Yes I followed. after I pulled the brand new disk it worked. Very quickly went to the 10min countdown and then started.
There is no count-down on the RN214 - Netgear dropped that with OS6. Instead you can switch between xraid and flexraid after the install (with no data loss).
MMcD3 wrote:
I have gotten into the NAS and all shows greenOnly at 14.8% now. 158hrs to finish per Systems/Volume tab - blue dialogue box on left. On the Systems tab, in the Overview, Volume and Performance subtabs all looks green. In Volume tab, the 3 drive have green lights. When clicked on each of the 3 drives, I gets a text box that doesn't appear to show anything bad.
It should sync in a couple hours at most, not a week. Something isn't right. Maybe let it run for a few more hours, and check again.
MMcD3 wrote:
However, On another thread, I saw a graph of system performance. I can't seem to find that to see what the CPU might have running as well.
Those graphs are only shown on x86 NAS (RN3xx and higher).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
