The Readynas versions are as follows...firmware: RAIDiator 4.2.22ReadyDLNA v1.0.25The scan is stuck. Unable to identify where the scan has stopped. Read most of the comments on this topic, but none of the question related to my version of the firmware. My firmware versions are newer. Since this is my main repository, it is important to restore access via DLNA. Like most, I've expended considerable money to ensuring the devices in my home work with the Readynas. Now all of my systems are down due to this problem.Thank you in advance for your assistance.

If you install the debug version addon from viewtopic.php?f=76&t=27946 you can download System Logs (Status>Logs>Download All Logs) and view upnp-av.log. That may give clues on where it died.

On NVX after the latest firmware upgrade and 1.0.25 I start to see the "Scan in progress"turning on debug and adding 1 folder at the time to figure out when the "Scan in progress" never finishes point,I notice that it starts when it encounter video file from Sony A77/HX5V/HX7V 1080p AVCHD.these files use to work fine and DLNA feed it to [2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD[2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD/2010-11-24[2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD/2010-11-24/BDMV[2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD/2010-11-24/BDMV/CLIPINF[2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD/2010-11-24/BDMV/PLAYLIST[2012/10/12 20:10:55] scanner.c:731: info: Scanning /c/media/Videos/AVCHD/2010-11-24/BDMV/STREAM[2012/10/12 20:10:55] metadata.c:883: debug: Container: 'mpegts' [00000.MTS]but the /c/media/Videos have a lot more files in it, so I can guess that maybe the scanner.c gave up on the rest of the files in the directory. but inotify.c put a watch on the directory and it keeps going back for a scan.[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD/2010-11-24[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD/2010-11-24/BDMV[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD/2010-11-24/BDMV/CLIPINF[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD/2010-11-24/BDMV/PLAYLIST[2012/10/12 20:10:56] inotify.c:160: debug: Add watch to /c/media/Videos/AVCHD/2010-11-24/BDMV/STREAM[2012/10/12 20:43:32] inotify.c:153: debug: Add watch to /c/media/Music

I had exactly the same on my Ultra 2 (Radiator V4.2.22 + ReadyDLNA v1.0.25).Scans crashed on any .MTS or .M2TS file. Moving the offending file out of the way allowed a rescan to continue until running into another MTS or M2TS file.I have now downgraded back to Radiator v4.2.21 and scans are happy with any MTS and M2TS again.

switched to RAIDiator-x86 4.2.21 and DLNA back to normal.will there be fix for ReadyDLNA in Radiator V4.2.22 ?

I'm on RAIDiator 4.2.22 & ReadyDLNA 1.0.25 and having this problem - the scan is getting stuck on an mpg file in my case.It used to work fine but I can't remember in which version, so I cannot go back.Is anybody from Netgear listening?

Ultra 6 stuck "Scan in progress" | NETGEAR Communities

18 Replies

Replies have been turned off for this discussion

Ney
Aspirant
Nov 22, 2012
Just a quick question, how do you roll back to .21 ? download the image and install as if an upgrade, or do you have to do anything special? Thanks :)
mdgm-ntgr
NETGEAR Employee Retired
Nov 22, 2012
Yes apply it as a local update as per the release notes: http://www.readynas.com/RAIDiator_x86_4_2_21_Notes
bobbyt1
Aspirant
Dec 01, 2012
I just want to chime in and say I had the same issue.
Thanks for posting a solution, I rolled back and it worked. Waiting for a new fixed firmware release now.
ipaul81
Aspirant
Dec 17, 2012
I have seen a similar thread to this. I can also confirm its a problem with 4.2.22. This needs to be addressed in the next update please.
cabecadas
Aspirant
Jan 05, 2013
Same problem here!
ReadyNAS Pro Business Edition (x86 Radiator 4.2.22) ReadyDLNA 1.0.25
geirrosset
Aspirant
Jan 12, 2013
Really???? This is the level of support one can expect from Netgear???? Months later and no fix. Netgear just moved way down my list of brands to consider when buying tech for work. This should have been patched a long time ago.
Wutse
Aspirant
Jan 23, 2013
Hy,

I create a ticket in the support page for this probleme. i expect for a quickly answer :P
Wutse
Aspirant
Jan 24, 2013
Hy,

The support don't know this problem and see with his high level for that... :(

Forum Discussion

Ultra 6 stuck "Scan in progress"

18 Replies

Related Content

Readynas Ultra 6

Enabling SSH access on Readynas Ultra 2

Backup job shows "In Progress" but is taking DAYS (100GB backup)

Readynas Ultra 6 Network issues??

Ready NAS Ultra 6 Dead??

NETGEAR Academy

ProSupport for Business