NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Upgraded to 6.6.0 and am now having performance issues
After upgradiing my firmware to 6.6.0 access to my netword raid is almost unusable. We have a pretty stable network with a small user base and have tried different forms of access to the raid via ne...
Try disabling IPv6 on the NAS.
Do you have ipv6 disabled on the NAS?
Hello StephenB, thanks for your reply.
I went under Network -> Links, clicked on the gear and see that both ipv4 and ipv6 are active. ipv4: using DHCP and ipv6 : Automatically/DHCP
Try disabling IPv6 on the NAS.
That seems to be it! Thanks
oh man, now I did it.
It went back to slow performance, and I thought it might be a good idea to switch from ipV4 to ipV6.... and now I can't access the admin.
I've restarted the NAS and no dice.
Boot mode -> OS Reinstal {sigh}
Just to wrap this up....
I continued having poor performance even after disabling ipv6.
All of the computers on our network are running MacOS, so I had set the acess to all my shares as AFP, however, I tried adding SMB access to all the shares and voilà... problem fixed.
I even enabled ipv6 again, and things continue to run smoothly.
Hi jonalexfilms,
Thank you very much for the feedback. If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The Netgear community looks forward to hearing from you and being a helpful resource in the future!
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
