× NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
× Introducing the new Orbi 770 Series Mesh System. To learn more click here.
Nighthawk M6 Pro Unlocked Hotspot 5G mmWave
Reply

Re: Ethernet dies after 5M

chadzi11a
Aspirant

Ethernet dies after 5M

I've been messing with this thing for hours and keep getting the same result. 

The Ethernet connection drops entirely after 5 minutes of being connected.

I've disabled Ethernet standby, but the issue persists (and the interval I'm dealing with is 5m, not 2m). 

 

The MR1100 is plugged into an outlet, not the computer. 

The Ethernet jack is hooked to my switch.

 

After 5 minutes it will go from 20 connected devices to 0 connected devices, and and the network goes dark, until the modem is reset, then it works for exactly 5 minutes before dropping. 

Any idea what's going on here?

Model: MR1100|Nighthawk M1 Mobile Router
Message 1 of 4
nielsvds
Luminary

Re: Ethernet dies after 5M

To rule out the switch that you are using. Try to connect directly one of your devices to the ethernet port on your MR1100. See how long the connection now lasts. How many ports does your switch has? How many devices are directly connected to that switch? Try to reduce the total amount of wired connected devices to see if the ethernet link stays up now.

Message 2 of 4
chadzi11a
Aspirant

Re: Ethernet dies after 5M

Will do, thanks. A non-technical friendade this suggestion earlier tonight and itales sense, from a troubleshooting perspective. Super confused why it doesn't work as is, but will give it a go.
Message 3 of 4
nielsvds
Luminary

Re: Ethernet dies after 5M

Sometimes it is also hardware limitation. Because it has a build in battery and is portable.

Message 4 of 4
Discussion stats
  • 3 replies
  • 1077 views
  • 1 kudo
  • 2 in conversation
Announcements

Orbi 770 Series