Questo topic è stato chiuso per inattività. Speriamo tu voglia prendere parte alla discussione pubblicando un post in un topic aperto o iniziandone uno nuovo.
Hi, After upgrade to version V1.0.0.64_1.0.1 D3600 loses all settings on every reboot. Could you provide instruction how to downgrade this firmware to version V1.0.0.47_1.0.1 on this device ?
Model: D3600|N600 WiFi Modem Router - 802.11n Dual Band Gigabit
This is the latest security feature that Netgear is introducing in their firmware for all consumer level devices. It protects the user from having their user ID and password settings for their ISP login retrieved in the event that their router is stolen.
This is the latest security feature that Netgear is introducing in their firmware for all consumer level devices. It protects the user from having their user ID and password settings for their ISP login retrieved in the event that their router is stolen.
If it is feature how I can configure router to remember settings after reboot ?
> > This is the latest security feature that Netgear is introducing [...]
> If it is feature [...]
I assume that that fellow was making a joke. Did you find it funny?
> Each attempt of downgrade ends with follwoing message: "Firmware > Upgrade Failed.Please Check your File".
Hmmm. Have you tried one of the newer older versions, like, say, V1.0.0.61_1.0.1? I know nothing, but perhaps smaller backward steps would work differently/better.
If a conventional installation isn't permitted, then perhaps a more brute-force method, like the TFTP method, could be used, instead.
Tftp method doesn't work, there is for while message that upgrade is in progress then tftp upgrade is interrupted. Maybe usage of UART interface could allow downgrade from firmware with bug. My modem have valid guarantee, so I am waiting for replacement.
It seems to be massive problem.Same situation here.Tried everything with no success.Hope Netgear guys provide us a solution as soon as possible.For now I replaced it with an older one.
Model: D3600|N600 WiFi Modem Router - 802.11n Dual Band Gigabit
I'm having same issue. after upgrade to V1.0.0.64_1.0.1 firmware it loses settings after avery reboot. I've trid to downgrade to V1.0.0.61 via web or TFTP but with no success.
Model: D3600|N600 WiFi Modem Router - 802.11n Dual Band Gigabit
Ref: D3600-V1.0.0.64_1.0.1. Firmware. Win10, Hi All, for what it is worth I have also tried all the above with no success. I have installed a firmware backup which gets the router D3600 working but if I disconnect the power, then yes, all the setting disappears. Every now and then something happens with the connection from the exchange which causes the connection to disconnect. I can live with this if I am home as I can start the router and go through the setup process again but this is no good if the connection goes down and it is just my wife and kids at home. They will be without the internet. Please Netgear, I hope you are listening as this makes my router virtually unusable.
Model: D3600|N600 WiFi Modem Router - 802.11n Dual Band Gigabit
Buonasera anchio ho avuto lo stesso problema, ma oggi grazie hai contatti con l'assistenza tecnica ho risolto il problema sono riuscito a mettere la versione 61 , quindi consiglio di aprire un ticket con l'assistenza che vi aiuterà a risolvere, le informazioni sono riservate no è possibile divulgare la soluzione a tutti, richiede conoscienze telnet.
