× NETGEAR will be terminating ReadyCLOUD service by July 1st, 2023. For more details click here.
Orbi WiFi 7 RBE973
Reply

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

givememynamebak
Luminary

ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

I'm deeply regretting my 628x purchase in 2019 (still under warranty I believe) since Netgear seems to have completely abandoned ReadyNAS product. Debian Jessie is old has also been archived.  They really should OpenSource ReadyNAS OS6 so the community can release future updates.  :::PLEASE PLEASE!:::

 

Anyway, I'm having a couple of problems which I can't seem to fix: 

 

$ apt-get update

W: GPG error: http://mirrors.edge.kernel.org/debian jessie Release: The following signatures were invalid: KEYEXPIRED 1668891673
W: The repository 'http://mirrors.kernel.org/debian jessie Release' is not signed.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.

 

The next is: 

apt-get -qy install build-essential ca-certificates libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev python-software-properties software-properties-common git-core python2.7
...after several successful Get packages... it terminates with:

E: Failed to fetch https://apt.readynas.com/packages/readynasos/dists/6.10.8/main/pool/l/linux/linux-libc-dev_4.4.218.1_amd64.deb Hash Sum mismatch

E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

 I'm not sure how to solve these... Hash Sum mismatch?  Is there a problem with the distro?  Any help is greatly appreciated!!  Thank you.

Model: RN628X|ReadyNAS 628X - Ultimate Performance Business Data Storage - 8-Bay
Message 1 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

I should mention, this is all after creating a new volume and a factory reset with OS 6.10.8.  Thoughts anyone?

Message 2 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Each one of these is after a fresh install and factory reset:

 

ReadyNAS OS 6.10.8
E: Failed to fetch https://apt.readynas.com/packages/readynasos/dists/6.10.8/main/pool/l/linux/linux-libc-dev_4.4.218.1... Hash Sum mismatch

 

 - Did someone manually update some files in the repository and forget to update the checksums.

 

ReadyNAS OS 6.10.7
Err:25 https://apt.readynas.com/packages/readynasos 6.10.7/main amd64 libc-dev-bin amd64 2.19-18+deb8u10.netgear1 403 Forbidden

 

 - This happens when a file is listed in the NTGR repo package list but isn’t actually in the repo.

 

What's going on Netgear?  It certainly would be nice if Netgear would just opensource ReadyNAS OS6 so the community can maintain it if they're no longer willing too!

Message 3 of 17
StephenB
Guru

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

I'm tagging the mods ( @Marc_V and @JeraldM ) to call this to their attention.

 

Message 4 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

@Marc_V and @JeraldM - any updates on this?

Message 5 of 17
JeraldM
NETGEAR Employee Retired

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Thanks for the ping @StephenB!

 

Hi @givememynamebak,

 

I've relayed this information to our L3 Engineers.

Please bear with us and thank you for your patience.

 

 

Regards,

 

JeraldM

NETGEAR Community Team

Message 6 of 17
mataglap2
Tutor

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Regarding the Debian repos, they have moved the jessie repos to http://archive.debian.org/debian/dists/jessie/ and there are different keys, see http://archive.debian.org/debian/pool/main/d/debian-archive-keyring/

 

Presumably, /etc/apt/source.list needs to be updated with the archive repo locations, and archive keyring package installed.

 

 

Message 7 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

@mataglap2  - Good point. I saw that too.

 

@Marc_Vand @JeraldM - can you please include a patch or hotfix with the updated keys and sources.list for debian jessie since it's now been moved to archive?  And as a special request, make ReadyNAS OS6 including readynasd open source so the community can keep things updated?

 

Thank you!

Message 8 of 17
tigerten
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

I have similar issues. Look forward to an hotfix as well. 

Message 9 of 17
Sandshark
Sensei

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

While I would love to see ReadyNAS OS open sourced, I fear that too many who have the skills to maintain it have abandoned the ReadyNAS.  The number of such folks was always limited, anyway.  I think a better solution may be to abandon ReadyNAS OS all together and go with a more generic OS.  The big problem, of course, is getting it onto a NAS without a video port.  If someone could create a bootable USB system that supports a USB video solution for NAS without a native video port and lets you install it (or any Linux system) on the NAS, that would be wonderful.  Doing everything via VNC would be another solution; but I think having a display is best, even if VNC is available as well.  The idea here is to do an initial install of FreeNAS or something similar and then being able to simply do normal Linux updates from that point on, not needing anything special to be maintained.

 

The biggest disadvantage is that one would most likely have to backup data, do the installation, and restore data.  A generic Linux OS with such a small OS partition just isn't very workable.

 

FWIW, all my non-sandbox NAS do have a video port, but I recognize that is a major stumbling block for most.  The second being putting something in the flash that will boot a non-Netgear OS.  Having it support the ReadyNAS LED display would be wonderful, but easy to live without with a "real" display.

Message 10 of 17
Grogu
Aspirant

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Have same problem with ReadyNas 526x but it seems that Netgear have no longer interest in supportting ex-customers. Its a pitty, despite the time of launch of Netgear products it still can operate (mine still operates with Docker strenghtened with additional 16 GB memory - however more and more images refuse to work due to oudated docker/system version). Having opportunity to install other OS supported by community as FreeNas, Open Media Vault, TrueNas or similar, would save CO2 and the planet ( correct Netgear Team??? 😆 )

For me personally it is painfull as I trusted Netgear having : Orbi, Arlo and two ReadyNas and sadly it seems to be a wrong choice.

Message 11 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

@Grogu- I created a ReadyNAS debian package for 19.03.9 which should buy more time.  It's available here under releases: https://github.com/jdnowak/readynas_docker

 

Make sure you shut off docker in frontview before installing as mentioned in the README.md or this git issue:  https://github.com/jdnowak/readynas_docker/issues/2

 

~Cheers

Message 12 of 17
givememynamebak
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

@JeraldM- Any status updates on this?

Message 13 of 17
StephenB
Guru

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie


@givememynamebak wrote:

@JeraldM- Any status updates on this?


FYI, he is no longer with Netgear.

Message 14 of 17
tigerten
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Are there still any MODs/Admin here working with Netgear? It appears the channel of communications between customers and Netgear has completely closed. 

 

Message 15 of 17
Grogu
Aspirant

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

@givememynamebak

I did it 2 weeks ago 🙂  still have problems (i.e. Calibre Web)  , anyway thanks for sharing 🙂

 

Im afraid that Netgear will ignore above requests as they do not care of  ex-customers they already monetized their product so what can we do ?

 

I'm convinced that the only way is to figure  out how to do It oursevles and avoid Netgear products in the future 

 

I found something for 424 not sure if it is aplicable for 526x or 628x :

https://community.netgear.com/t5/New-ReadyNAS-Users-General/Tutorial-How-to-install-your-own-Linux-O...

 

 
Message 16 of 17
eton
Luminary

Re: ReadyNAS 628X - KEYEXPIRED & Hash Sum mismatch - Debian jessie

Sorry for the late reply. I am not active in this forum anymore since they moved it to the horrendous forum platform Khoros (former Lithium).

 

You can still install packages unauthenticated by adding --allow-unauthenticated, example:

apt-get install --allow-unauthenticated exfat-fuse exfat-utils

 

Or add the argument to a config so that you don't need to write it each time with:

echo 'APT::Get::custom-arguments "--allow-unauthenticated";' >> /etc/apt/apt.conf.d/999myconfig

 

Message 17 of 17
Top Contributors
Discussion stats
  • 16 replies
  • 4771 views
  • 10 kudos
  • 8 in conversation
Announcements