LBR20 lte port forwarding not working

[styvy]

hi everybody

i have configured port forwadins http: 8080   but not working on LTELBR20

do i need static IP or no  for LTE

if a test with other router with IPS modem cable  and open port 8080 is working

 do you knows why is notworking

best regard

[KevinLiT]

Hi styvy,

I understand that you would like more information to successfully implement port forwarding on your LBR20. 

I have included steps below on how to port forward with the LBR20: 

• Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering page displays
• Leave the Port Forwarding radio button selected as the service type.
• Click the Add Custom Service button. The Ports - Custom Services page displays.
• In the Service Name field, enter a descriptive name. 
• In the Protocol menu, select the protocol. If you are unsure, select TCP/UDP. 
• In the External Port range field, enter the port numbers. 
• Specify the internal ports by one of these methods:
• Leave the Use the same port range for the Internal port check box selected. 
• Type the port numbers in the Internal port range field. 
• Type the IP address in the Internal IP address fields or select the radio button for an attached device listed in the table. 
• Click the Apply button. The service is now in the list on the Port Forwarding/Port Triggering page

For more information on port forwarding please navigate to the link below (page 122):

https://www.downloads.netgear.com/files/GDC/LBR20/Orbi_LBR20_UM_EN.pdf

Best,

Kevin

Community Team