Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
This topic has been closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Start a New Discussion
Hi,
I have a problem with a JGS524PE (FW 2.6.0.48) web GUI that it's not reachable behind a wireguard tunnel.
It's reachable normally without wireguard by any client on the same subnet.
The error using a web browser is: ERR_CONNECTION_REFUSED
The error using curl is the same: curl: (7) Failed to connect to 192.168.21.2 port 80 after 2465 ms: Connection refused
My setup is pretty simple and straightforward:
WAN -> Router -> JGS524PE -> Clients / AP / Other switches
Normal LAN clients subnet: 192.168.21.xxx
Wireguard clients: 10.9.0.xxx
No VLAN
Wireguard endpoint is offered by a client directly attached to JGS524PE
Every other clients is reachable from WAN to LAN and viceversa, even a Netgear GS108Tv3 connected to JGS524PE
Access control doesn't solve the issue, the other switch (GS108Tv3) is working fine even using deafult settings.
Any help?
