NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
DiscussionsMost RecentNewest TopicsNo Replies YetSolutionsThe IP address conflicts with the WAN IP subnet Old thread yes I know, but I recently solved this myself through some troubleshooting, as I had the same issue. In the "internet setup" page in settings, do you have any LAN IP's entered in your DNS...Disabling Guest Access to LAN on R6300v2 I am unable to Disable access to LAN resources on my Guest Accounts. The option "Allow guests to see each other and access my local network" on the "GUEST NETWORK" tab is checked and disabled (Graye...How to access routerlogin.net for n600 model Seriously, how the h can I get to the routerlogin.net to configure my n600 model router? Ever since we were using this router, it has always been a huge pain in the a to try to get the page works. I ...Can't access router password I have the same problem all the time Anyone tried using AI to troubleshoot or optimize WiFi setup? Hey all, Bit of a random one—but has anyone here used AI tools to help with router setup or signal issues? I asked one to help fix my “WiFi in kitchen = nope” situation, and to my surprise, it gave...SolvedWireless Repeating Function is not available Good day, everyone. In 2025 I dug up kinda old Netgear WNR3500L v2. I wish to use it as a wireless repeater with my actual router so I can connect via Ethernet devices, those are too far from my ...[R6400] Wired Works, Wireless drops out frequently during day I've got an R6400 handling wired and wireless networking in my small apartment. Always once a day, sometimes twice a day, all wireless devices will lose wireless internet connectivity, and I will...AC1750 WiFi Router (R6400) one time login password AC1750 WiFi Router (R6400) one time login password how can I get this email to me again WGR614 v6 cannot get webinterface to work When going through old stuff still in my collection I found a piece WGR614 v6, it had been configured LAN 10.0.0.2 and a WLAN, as written on a label on it. Once I could get access to it with the IP 1...Registration is required It appears that registration is required in order to configure the router (to change the SSID, for example).
