NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Recent Content
PoE doesn't start_GS308EP
We use the GS308EP to manage 2 differents VLAN in our custom system. the port 1 is used to power on a RFID reader (FEIG MR102), the others ports are for classic ethernet commnication. We configure it as we wanted and it works as expected, but we have an issue on the activation of the PoE function at the start of our system. The switch power supply come from an electric inverter (which supplies the main power line when its function of inverter is not needed). Upstream the inverter we put a circuit breaker (2CSR275180R1164 DS201 M C16 A30). Our issue follow this patern: If we turn our system ON, by starting it from the inverter (with the circuit breaker open), the PoE launches without a problem, in all cases. If we turn our system ON, with the circuit breaker close and we start the inverter, the PoE doesn't launch, and if we open the circuit breaker, the supply from the inverter takes over and the PoE launches immediatly When we say "PoE doesn't launch", we mean the green led on the port (and the orange) doesn't turn ON. And we say that "the PoE starts" because the green led turn ON. We suspected the circuit breaker, and change the type (from AC to A), but the issue continue. We have isolated the switch to keep only the port 1 (to know if the issue could came from some interference from something else), but the issue still occur. What is bother us the most is that, after changing the circuit breaker, the issue seemed to have been resolved (we made severals power ON test), and the PoE did activate in some previous problematics cases, but at one time, on another test of power ON, the PoE didn't launch (only by open the circuit breaker like before), and we went further by powering it ON on a normal power outlet , and even like this, the PoE didn't launch... The software is up to date (V2.0. something), the configuration seems ok, we activated the long time detection, etc It is not an isolated case, on one of our other product we reproduce the issue (same hardware configuration). Thanks for the help we could get.OpenVPN funktioniert nicht mehr
Hallo zusammen, Habe die letzten Jahre immer problemlos mit OpenVPN gearbeitet. Seit ca. einem Monat funktioniert der Zugriff nicht mehr. Installierte Version OpenVPN Connect: 3.8.0 (4528) Netgear Router RBR850 Dyn DNS by NOIP Fehler: [Dec 6, 2025, 09:59:50] Server poll timeout, trying next remote entry... ⏎[Dec 6, 2025, 09:59:50] EVENT: RECONNECTING ⏎[Dec 6, 2025, 09:59:50] EVENT: RESOLVE ⏎[Dec 6, 2025, 09:59:50] Contacting IP:12973 via UDP ⏎[Dec 6, 2025, 09:59:50] EVENT: WAIT ⏎[Dec 6, 2025, 09:59:50] WinCommandAgent: transmitting bypass route to IP { "host" : "IP", "ipv6" : false } ⏎[Dec 6, 2025, 09:59:50] Connecting to [URL]:12973 (IP) via UDP ⏎ Was hat sich geändert? Wert hat Erfahrung? Danke für Inputs. Gruess DanyI ｗant to bulk register MAC ACLs in insight
I would like to add about 200 devices to the MAC ACL "Allow" list in Netgear Insight. I understand how to add them manually one by one, but is there a way to bulk import devices, such as using a CSV file? Or is manual addition the only option? If you know, could you please let me know?WAX625 | No firmware 12.5.0.12 inside Netgear Insight list
Hi, On Jan 6, 2026, 10:02 PM PT, I received alert from Netgear Insight Alert (via e-mail) that new firmware is available: WAX625/WAX628 Firmware Version 12.5.0.12 I am interested in installing this firmware as it supposedly fixes issues with random reboots and I was experiencing something similar where device just locks itself and all SSIDs become unavailable and the only remedy was power restart. Those power restarts are not trivial for me because WAP is PoE powered and high up on the wall. I was forced to buy a timer which cuts out power to the whole network rack including main router (fw) and WAX625. I went into the Netgear Insight > Firmware > Set Target Firmware (upper right corner) to find this firmware 12.5.0.12 and it is not on the list. The latest I see is 11.8.0.9 which appears to be also the one I have installed and the latest one listed on the product page: https://www.netgear.com/support/product/wax625 So, I am wondering what is going on here? Why did I get this e-mail when the firmware is not generally available for install? Thank you!Netgear Gaming Issues
HELP. I cannot play Street Fighter V ranked without getting disconnected every 3rd match with the same error code (40002) without fail. I'm hardwired, I have port forwarded the suggested ports, changed my DNS, uninstalled/reinstalled, changed IP's, turned off IPv6 and changed my NAT type to open. This pc and my amazon fire tv are the only thing this router is connected to and nothing has worked. I've contacted Capcom support and they just told me to do all the things I just listed above (which I had already done). It has 0 issues with any other P2P fighting game, only Street Fighter. I have 0 idea what else to do, please help. AC1200 WiFi Router (R6220)Most online devices not showing on on device list after router reboot
I did a reboot on my Orbi 870 system last night. Since doing this, on a few of my devices are showing on the connected device list on the router. I have around 30 devices connected to the system but only a handful are showing on the device list list the reboot. I have 3 satellites connected via wireless backhaul. All are showing a good connection. However all are showing IP's of 0.0.0.0. Has anyone come across this and have a solution?Cannot remove/block devices from admin web UI [RS300]
I just installed a Nighthawk RS300 wireless router. I enabled "Access Control" and I was able to put the MAC address + name in the list of allowed devices, however, with the admin web UI, I cannot remove any devices that are not already connected, and the other lists are extremely truncated. The firemware is "Router Firmware Version V1.0.5.22". I've entert 60 devices. Of those devices, 10 show as connected, only 2 show up as "allowed and not connected" and only 2 show as "blocked and not connected". There are 46 entries that are totally missing.Strange Warranty
I bought an AXE7800 at the end of last year. It worked well for several months until last week I lost internet connection (the Internet LED was solid amber). I tried power cycle my cable modem and the router for many times and it did not work. So I switched to another router and it worked well. I contacted Netgear service and ask for RMA. After asking me a few questions they just told me that my router was good and provide no explanation. If I need more information, I have to pay first. Not sure if this is NG's warranty policy. It sounds ridiculous to me. I have used NG products for more than 15 years but probably will be no more.Unable to update Readynas Pro 6 to OS6
Hi Everyone I recently pickep a ReadyNas Pro 6 RNDO6000-100. I have already updated it to 4.2.4 and also update the bios Now here is my issue whenever installed the prepfile for os6 addon it seemd like it goes then i try uploading the os4toos6.bin file it keep on saying local upload failed, ive been trying and reading through the forum for the past 3 to 4 days now for a solution and nothing.CM1100 won't connect to routers
I have a CM1100 that started having issues today. It will not connect to my router. It will, however, connect directly to a laptop. My setup is: ISP -> CM1100 -> Router/Firewall -> APs & Switches But the link between the CM1100 and Router/Firewall doesn't work. If I change things up: ISP -> CM1100 -> Laptop Everything works just fine. It does not matter which port I connect to on the CM1100. Here are my troubleshooting steps: Power cycle the modem and Router/Firewall Check the coax connection on the CM1100 Try both ports on the CM1100 Try different WAN ports on the Router/Firewall Try different cables with steps 2 and 3 Connect my cellular modem to the Router/Firewall and verify that internet works on both WAN ports Try different cables between the cellular modem and Router/Firewall Try a new Router/Firewall on the CM1100, repeating steps 2, 3 and 4 Pick-up a modem from my ISP and verify it works with both Router/Firewalls So, I'm at a loss as what to do next. No matter what I do, I can't connect to the CM1100 through a Router/Firewall, only directly. Has anyone experienced this?