NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS105 and Yale Smart Alarm / Swann CCTV DVR
Hi,
I have a Netgear GS105 which is connected from my Virgin Smart Hub 3.0 (in Modem Mode) by an ethernet cable. Then into the hub i have connected a Google Wifi Point (Works Fine). I have then tri...
Hi Dan_Bate,
Welcome to the community! :)
Since the Virgin Smart Hub 3.0 is in modem mode and the GS105 switch is directly connected to it, you will need a router in between the Virgin Smart Hub 3.0 and GS105 switch. Otherwise, if its possible to set the Virgin Smart Hub 3.0 to modem/router mode then that would help. The router will be the DHCP server that will provide local IP address to the Swann CCTV DVR.
With regard to the connection between the GS105 switch and the Yale Smart Hub 2.0, have you tried other ports of the GS105 switch? Also, try changing the ethernet cable.
Regards,
DaneA
NETGEAR Community Team
Hi Dan_Bate,
Welcome to the community! :)
Since the Virgin Smart Hub 3.0 is in modem mode and the GS105 switch is directly connected to it, you will need a router in between the Virgin Smart Hub 3.0 and GS105 switch. Otherwise, if its possible to set the Virgin Smart Hub 3.0 to modem/router mode then that would help. The router will be the DHCP server that will provide local IP address to the Swann CCTV DVR.
With regard to the connection between the GS105 switch and the Yale Smart Hub 2.0, have you tried other ports of the GS105 switch? Also, try changing the ethernet cable.
Regards,
DaneA
NETGEAR Community Team
You Hero. Thank you. Myself, Virgin, Swann and Yale have both been stuck on something which as it turns out was simple. I glad i asked before ripping everything back out again.
Thank You
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
