NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Issue... 'Date modified' set to a future date!
I'm running a ReadyNAS Pro 6 with firmware version 4.2.31. Recently I upgraded all the disks from 2 GB WD40EFRX to 4GB WD40EFRX. To get the full size and eliminate an expansion error I laboriously copied all the files for each share to another USB drive, performed a full factory reset, and copied all the files back. I did this with no errors.
I then used created backup jobs and using rsync and partially copied the main shares to my backup readyNAS NVX (loaded with 4 3GB WD40EFRX drives). The first share completed this 16-October.
Today I look at the modification dates of all the files on the PRO 6 and they are sent to some future date. This appears uniformly across all the shares. However the files copied to the NVX all appear to have the correct date (as do the files on the USB drive).
Any thoughts on what is happening? At first I thought rsync was changing dates as it copied but there are other shares that rsync did not touch that have the same issue.
This is not one or two files – it is the whole ReadyNAS Pro 6 device.
8 Replies
Replies have been turned off for this discussion
It certainly sounds like the date on your NAS is wrong. What NNTP server are you using and what date does the NAS show in the latest log entries?
NTP option is set to
server1 : time-a.netgear.com
server 2: time-c.netgear.com
I thought of this but shouldn't the date be set to the file copied over? And then there is the bizarre situation where the dates were correct (as captured by the rsync copy). What possibly could cause all the dates to get set wrong. I should add that both the ‘date modified’ and the ‘date created’ are reset. Generally they are around the year 2029-2033. As an example a file with an original date of Nov 27, 2011 6:34AM is reset to Sep 13, 2027, 4:34PM. I’m interfacing with a mac via AFP.
I note there is a feature in Share advanced options that can ‘adjust the timestamps of the contents of the share.’ But I have not used this – something on the order of 16 years is probably more minutes than can be adjusted. Besides there seems to be something more fundamental going on here.
Help! I’ve done a lot of work on my files since the last Rsync and really want to fix this.
OK I've got some more troubleshooting data. Turns out the NTP server box was not checked. I checked it and hit apply but that did not fix the problem.
Since I didn’t changes this I go to the logs... see below. As you can see the clock seems to have disengaged after the 2nd backup job finished. I now recall that somewhere in the middle of the 3rd backup job there was a power outage in the night. I woke up the following morning to the UPS ringing (didn’t hear when it went off). Both ReadyNAS devices were shut down. I reset the UPS and restarted the NAS and restarted the backup job manually. Apparently when the NAS was turned on the clock was reset…
Still confused. Why would the system clock change already existing time stamps on files? The files in shares 1 & 2 which did successfully get backed up were also changed and they were copied with the correct clock… Just doen't make sense.
Help.
Thu Jan 3 04:14:42 PST 2002
The on-line filesystem consistency check completed without errors for Volume C.
Thu Jan 3 04:00:03 PST 2002
The on-line filesystem consistency check has started for Volume C.
Thu Jan 3 01:03:32 PST 2002
Backup job successfully saved.
Thu Jan 3 01:00:28 PST 2002
System is up.
Thu Jan 3 00:59:22 PST 2002
Job cancelled. [Job 003]
Thu Jan 3 00:58:59 PST 2002
Rebooting device...
Thu Jan 3 00:58:58 PST 2002
Please close this browser session and use RAIDar to reconnect to the device. System rebooting...
Thu Jan 3 00:58:20 PST 2002
System clock has been updated.
Wed Jan 2 22:24:29 PST 2002
Backup started. [Job 003]
Mon Dec 31 16:01:37 PST 2001
System is up.
Tue Oct 17 15:47:40 PDT 2017
Backup finished. [Job 002]
Mon Oct 16 20:08:07 PDT 2017
Backup finished. [Job 001]
Sun Oct 15 17:20:55 PDT 2017
System is up.
Sun Oct 15 17:19:27 PDT 2017
Rebooting device...
Sun Oct 15 17:19:27 PDT 2017
Please close this browser session and use RAIDar to reconnect to the device. System rebooting...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
