NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RND4000v2 - RND4000 NV+ v2 - Readynas Wont Switch On Boot Up
Hello All, I am hoping for some guidance here. I have a Readynas NV+ v2 that wont switch on or boot up. The power supply has a green light indicator on the inline transformer brick and there...
Detritusuk wrote:
Lets be clear too, that the main aim is to get the data off that's required from the drives. Configured as Flex Raid. 4 disks and single hard drive redundancy.
It should be possible to mount the RAID array manually in an x86 linux system.
You can also use RAID recovery software in a PC - R-Studio would work. You'd want the $79.99 version.
Note you can see if the software can access your data before purchase.
The NV+ V2 in one ReadyNAS I have never owned. There are two things that can cause the unit to boot directly into the boot menu. One is that the NAS believes the reset button is pushed. The other is bad firmware, as that's what provides the boot menu.
Netgear has never released schematics for the ReadyNAS line, so fault isolation of hardware issues it tough. But you could open the unit and at least see if the button seems to be working. Most ReadyNAS buttons are double-pole and use both for redundancy, but the reset button may not because it's not used often. I would pursue this if the next option doesn't work.
USB recovery should fix a firmware problem, but finding the tool to do so is difficult. See Requesting-USB-recovery-for-NV-v2 , which is from a user with the same issue as yours and a link to the proper tool is in a reply.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
