Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
‎2024-02-26
09:07 AM
2 Kudos
Hi I currently have a ReadyNAS 214 device which after updating to firmware version 6.10.10, no longer allows me to install or update apps via the admin page as Netgear have now disable...
Show results in replies (8)
-
@Rickjones80 wrote: I currently have a ReadyNAS 214 device which after updating to...
-
I'm SO glad I didn't just auto-update. I saw the mention of the "Apps" change in the release notes ...
-
@XrayDoc88 wrote: 1. Did firmware 6.10.9 even apply to the RN628X? My NAS we...
-
Thank you StevenB. I've only ever updated the firmware by simply clicking ok. I didn't ...
-
@StephenB wrote: In my case, the metadata libraries are on the PC, and the transcoding...
-
I just had this same issue after an auto update. I only run PLEX app and when the new update came o...
-
So all you did was downgrade the firmware and you were able to upload the new ReadyNAS PLEX server?...
-
Then that means Plex doesn't need any new or updated standard packages. Not surprising if it ...
‎2023-07-16
05:30 PM
Hi! I received an alert my volume was degraded (Disk #2). It then told me: Detected increasing reallocated sector count: [606] on disk 2 (Internal) [WDC WD60EFRX-68L0BN1 WD-WX21D5533R6R] 32 times in...
Labels:
Show results in replies (8)
-
@ummjay wrote: thanks @StephenB and @MikeD1234 . So now I've backed up ...
-
thanks @StephenB and @MikeD1234 . So now I've backed up the data from my 6TB to...
-
Hi @MikeD1234 and @StephenB , I've sent you a private message with my log files...
-
@Sandshark yes, I believe that's the issue. Adjusted my comment, I meant to type RAID1 not 5...
-
thanks everyone. So I'm expecting my new 10tb drive to arrive this Thursday. What I am thinking of ...
-
@ummjay wrote: I took that drive out (as I have just ordered another one and was l...
-
I took the right disc out, and my data was not accessible. I then put my right disc back in, and th...
-
@MikeD1234 If he was using RAID0, the loss of a drive would not have caused the volume t...
‎2023-07-29
08:16 PM
When I login to armor security on Android i get a 403 error on cloudfront but iphone app is working fine. Please fix your app!
Show results in replies (8)
-
Fixed! I can login now 😄 Samsung Fold 5
-
-
Shake feature is not in android devices
-
Same issue here. I've just received a new phone and am unable to login and activate Bitdefender thr...
-
Yes, fixed for multiple android devices 🎉🎉
-
On Sunday I was on the phone with Netgear Support, going through the troubleshooting and gathering ...
-
Having the same issues as well. Has anyone already found a solution for this? Otherwise it renders...
-
Just bought the new Samsung Fold 5 and I have the issue.
‎2023-09-26
10:05 AM
Hi; I have the R8000P (AC4000) and about two weeks ago noticed my WiFI speed dropped precipitously from between 300-400Mbps to about 150Mbps. I am on a fiber gigabit plan through my ISP provider.&nbs...
Show results in replies (9)
-
Yes, or 192.168.1.1 or the routers IP address you may have configured on it. There is a FW update s...
-
@DesertRat66 wrote: From what I understand, even though the service is fiber, once the sign...
-
I have the Zyxel 3000z modem. If simple enough for a layperson like me to accompli...
-
The Zyxel is a modem/router provided by CenturyLink and is fed by a fiber line running into the hom...
-
So today I had hoped to resolve the bottleneck by doing two things. 1). Installed latest firmware a...
-
Yes, sorry as I thought I’d mentioned that initially. I’m traveling now so can’t recall the specifi...
-
@DesertRat66 wrote: I DO have the Netgear router connected to this modem. It’s actually a sur...
-
Try disabling the following and see: Armor, Smart Parental Controls or Circle, Traffic Meter. &n...
-
Thanks again; to answer your question, yes, I have performed the steps you describe here - powering...
‎2023-05-26
01:50 PM
1 Kudo
I am trying to turn off Anywhere Access on my RAX50. My iPhone is connected to it by WiFi. In the Nighthawk app it tells me I must connect locally to turn Anywhere Access off. How do I connect loc...
Show results in replies (8)
-
Kitsap, unfortunately, the R9000 and the RAX50 are different. You probably saw the screenshots I po...
-
I’ve tried to find Anywhere Access or Remote Management in routerlogin without the Nighthawk instal...
-
For the benefit of other users who may turn up here with a similar challenge, can you flag up which...
-
I have looked high and low to find the specific location of the setting for Anywhere Access on remo...
-
@cyberbiker wrote: Kitsap, unfortunately, the R9000 and the RAX50 are different. You probably...
-
Have you even been able to find the setting for Anywhere Access on routerlogin.net? When I open ...
-
Attempting to configure, troubleshoot, or manage a router via an application on a mobile device is ...
-
Connect your computer or device to your router's network. Open a web browser and enter "r...
‎2023-10-18
02:19 PM
Hi All, I recently upgraded my Xfinity service to 800 Mbps which forced me to replace a decade old modem that wasn't up to the task. I opted for the Xfinity approved Netgear CM1000v2 m...
Show results in replies (8)
-
After "bending" the network in several different directions, I found a solution to most all issues....
-
@Shubox56 wrote: Thank you for the quick response. I'm a network neophyte with lots to learn...
-
That is specifically why the second Wi-Fi router is configured as a wired access point. The r...
-
"I think your mean RAX50 in your next to last sentence (typo?)." OOOPPPPS! Yes, RAX50. ...
-
@Shubox56 wrote: Just when I thought I had it all figured out, something else came to mind....
-
@Shubox56 wrote: Hi All, I recently upgraded my Xfinity service to 800 Mbps which f...
-
Thanks to all! Lots of good suggestions. Hardwiring the entire house isn...
-
Thank you for the quick response. I'm a network neophyte with lots to learn. I'll take some time to...
‎2024-03-20
03:27 PM
1 Kudo
Model: RAX42 EOM Provide : Xfinity Purchased this modem 11 months ago. Had no issues and now it will no longer connect to the internet. I have tried the following. ...
Show results in replies (6)
-
Start off by looking at your terminology. The CM700 is a cable modem and the RAX42 is a Wi-Fi...
-
@lindylex wrote: RAX42 is my Wifi modem I am having issues with. Is that clearer? ...
-
@HarryPalmerz wrote: my bet's on that gratuitous praise being sarcasm. ...
-
Please post a copy and paste of the modems connection status and event log page. https://kb.netgea...
-
Correct nothing but respect from me here!
-
FURRYe38, the information you requested. ] Event Logs [ Mar 13 2024 05:47:35 ...
‎2023-07-27
11:25 AM
I have the following product Orbi AC3000 Tri-band WiFi Router (RBR50) and I would like to create a mixed local area network using a network switch to connect devices such as pc, smart tv, printer and...
Orbi AC3000 Tri-band WiFi System (RBK53)
NETGEAR
Orbi AC3000 Tri-band WiFi System (RBK53)
Whole Home Mesh WiFi Systems (AC)
Show results in replies (8)
-
Those will work find until your ready to upgrade. I recommend getting the non (E) versions ...
-
NGs GS series GS-105/108 work well with Orbi
-
Those will work as well.
-
Those will work as well.
-
I have to connect the 8-port switch to the router, as 6 LAN cables will arrive while I have to conn...
-
Unless physical space is an absolute deal breaker, the 5 port model of this switch costs $1 more th...
-
@pierre22 wrote: I wanted to ask what type of cable and switch I need, the tools and any si...
-
I wanted to ask what type of cable and switch I need, the tools and any since I would have to wire ...
‎2024-04-04
11:54 AM
Hi, I have an RBR750 system with 2 RBS750 satellites. We've moved to a bigger house and the system isn't quite covering the whole property. You can't seem to buy additional satellites for the 750 sy...
Show results in replies (9)
-
@FURRYe38 Finally seem to have it fixed. The issue with the FW was that I was trying to update...
-
It's big enough that my current system has a dead zone at the rear of the house (inside) so I just ...
-
About 7000 square foot over 3 floors.
-
There a size in sq feet?
-
Yes. You'll probably need to ethernet connect the RBS 850 first to the RBR and get the FW o...
-
Thanks for the response but I just need to know if a RBS850 can be added to a RBR750 system.
-
The latest firmware for the 750 product can be found here: https://kb.netgear.com/000065815/RBR75...
-
Thanks but I was asking about the 850 products I'm adding to my 750 system.
-
@FURRYe38 Thanks for confirming and your advice so far. So, how do I get the same FW onto the ...
‎2024-03-25
06:50 AM
I am using the ORBI LBR20 with standard, out-of-the-box configuration. All of my devices can see the SSID and connect to the WiFi network, except my older Apple Powerbooks (I still use two of them) d...
Labels:
Show results in replies (5)
-
Ah, So maybe not AES supporting which is possible. Try WPA and TKIP setting on the LBR? &nb...
-
FYI, 20 series Orbis don't support AX modes. They are all AC mode systems.
-
Seems like it or something maybe in the newer generation signals of orbi maybe something that older...
-
@CrimpOn wrote: Also, it might be interesting to enable the Orbi Guest WiFi network (tempora...
-
Glad you figured it out. At least you know. Please mark your thread as solved so others will know...