Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
100,000 results
Sorted by:
2023-11-22
05:13 AM
After the latest updates with chrome, The certificate is not secure and I get this: This site can’t be reached The webpage at https://192.168.x.x/ might be temporarily down or it ...
Show results in replies (8)
-
Here is the solution I found: We found a fix. Delete the user's local state file located i...
-
Have same problem on Mac OS 14.3.1 (23D60) latest Chrome Chrome is up to date Versio...
-
@schumaku wrote: The --force.... is a parameter to be passed to Chromw on start-up from the...
-
chrome --force-fieldtrials=RSAKeyUsageForLocalAnchors/DisabledLaunch does not work in my pc, ...
-
Perhaps I am not doing it correctly. Windows 11 Pro. trying to open https://orbilogin.net or ...
-
Heya @CrimpOn Looks like you are mixing several different issues and models. ...
-
@JBX_Industries I am not sure. The only I know is that my particular model is now listed as "E...
-
I am having the same issue with a customers router as well. I have tried accessing the management i...
2023-11-06
05:54 PM
Hello, Recently we were told by our ISP (Spectrum) that our Internet speed has increased from 100MB to 300MB. Not only did this not happen, but our upload speeds are now nonexistent when connected v...
Show results in replies (8)
-
Thanks FurryE38. Well I have an update! Spectrum came out and replaced the line due to errors they...
-
Hi swingtime! I actually answered your question- see the reply right above your most recent post.
-
I highly recommend next time, of you do have to get something different, go with separate modem and...
-
What "single switch in the control panel did you punch? Thx. "There's literally a si...
-
I do not see a "Prioritization Engine" switch of any sort on my netgear http://192.168.0.1/&nb...
-
I believe this "Prioritization Engine" feature is located on the Killer adapter cards control ...
-
Hi FURRYe38, unfortunately that did not work. Specifically, I powered off the NetGear, shut down a ...
-
Id get a onsite tech visit and have them look at your modem and the line going up to the modem. Hav...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
ht...
Show results in replies (9)
-
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. &...
-
What is Supports IoT network? Is this a new feature or capability? How does it work? Would I need t...
-
Watching this thread for updates on performance before I upgrade.
-
Having real problems, I cannot updare the Firmware on Satellite at all. Just wont accept the file, ...
-
@FURRYe38 wrote: Why it was in beta since January. Because I have had to use all s...
-
There are ways to handle that. This just seems like a quick and dirty way to be able to have a netw...
-
Updated to 7.2.6.21 , from 4.6.14.3 , went fine on my end. Updated satellite first then router. Did...
-
If you do happen to experience a problem, power OFF the system for 1 minute then back ON. It would ...
-
What is Improves the stability of connections between router and satellites? Did the backhaul conne...
2023-11-28
02:45 AM
I have just got Starlink and can connect wirelessly to it fine. I can put it in bypass mode, plug a 2m ethernet cable into the adaptor and connect this to my Netgear 4 - Stream AX1800 WiFi 6 Router, ...
Show results in replies (7)
-
SOLVED! I put a switch in between the Starlink ethernet adapter and the cat cable which runs up to ...
-
Sorry, I can confirm, the cable is cat5e
-
Some say there is a ethernet adapter that comes from the ISP that maybe needed and or use of a non ...
-
@J27 wrote: Someone elsewhere suggested it could be an IP issue, but I’m not sure? Thanks ...
-
Thanks for your quick reply. Re your first question, the “it” in bypass mode is the Starlink rou...
-
@J27 wrote: I have just got Starlink and can connect wirelessly to it fine. I can put it in b...
-
@J27 wrote: Re your 2nd question, the adapter is the Starlink ethernet adapter you can purc...
2024-02-13
09:30 PM
I recently upgraded to a Samsung S24 Ultra. Was surprised to see a Wifi 7 icon when I had setup my phone at home with my Orbi RBE 970s. However it felt like it was slower. I still have my old phon...
Show results in replies (6)
-
It should. It could be simply rebooting the wireless allowed it to switch to the 6ghz. Some...
-
A couple points to make. 1. you don't say (and the settings don't show) if you're connectin...
-
@Sagnew wrote: Re : 5ghz vs 6ghz signals. The Wifi 7 connection is a via a 5ghz channel.--...
-
yes you're connecting to the 5ghz band and at 80hz. Not sure why its connecting at 80hz unl...
-
Did you try swapping to a different 5ghz channel? And not sure what you mean by "more typic...
-
I am jumping around a bit .... I was playing around with the settings I noticed the "Advan...
2023-09-08
08:21 AM
3 Kudos
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System htt...
Show results in replies (9)
-
Update went smooth, no issues so far.
-
That screen shot clearly shows the IoT network enabled on 2.4G and 5G.
-
Hi, The update went without problems and everything seems to work. I'm having a curious ...
-
Is there a documentation what this exactly means: Supports IoT network. Is it "only" cr...
-
Lets try this, FR the RBS then turn it OFF. Use the RBRs web page and go into Basic tab/Con...
-
I updated my RBK853 to the 7.2.6.21 firmware manually. Updated from 4.6.14.3. Update went smoothly,...
-
All good so far. No issues at all with the upgrade. I'm glad Netgear decided to take this ...
-
Sometimes a soft reboot doesn't work well or is not enough. Powering OFF the RBR for 1 minute then ...
-
Amen. @Validus wrote: That hidden Wifi network it's picked up is likely actually ...
2024-03-03
06:50 AM
...oots. Key usage is already required for ECDSA certificates, and for publicly trusted certificates. Enterprises can test and temporarily disable key usage enforcement using the R...
Show results in replies (7)
-
SXR80/SXS80: here SRR30/SXS30: here
-
Trying to enter the menu of the Orbi-Pro-router using Edge or Chrome can lead to the message: &nbs...
-
Hello @100won, And welcome to the NETGEAR Community! 🙂 This is already an on...
-
So navigating to HKEY_LOCAL_MACHINE\SOFTWARE\Policies in regedit on my Windows11 23h2 machine ...
-
Hi, I tested in my laptop before posting here. I usually use edge and chrome browser.
-
Hi @ReneD ! If there is a patch firmware for this issue I'm also in need for it. Can ...
-
Is there also a patch for the SRS60?
2023-08-19
02:48 AM
My router is randomly and intermittently turning off it's wired and WiFi connections, which means every device connected loses it's connection. It occurred several times yesterday and sometimes occu...
Show results in replies (8)
-
The modem is a tp link TD-W9970 in bridge mode, but it has been 100% stable since I setup the ...
-
@cuke2u wrote: I guess I thought that as the SkyQ hub supports ipv6 then I should try to tu...
-
@cuke2u wrote: As I have SkyQ and Sky broadband then they supplied the hub but I decided to...
-
I guess I thought that as the SkyQ hub supports ipv6 then I should try to turn it on with the RAX70...
-
As I have SkyQ and Sky broadband then they supplied the hub but I decided to replace the hub as I h...
-
I was able to witness more what is occurring as the network cable disconnected came up on my tv thi...
-
@schumaku wrote: Beyond, a not so fun fact is that the RAX70 WAN port does run on Fast Ethe...
-
@cuke2u wrote: Thanks, the router has firmware version 1.0.14.134 and it's connected to a mo...
2024-04-13
06:55 PM
Hi, fellow Orbians! I had an older Orbi system (AX4200) and was gifted this RBR850 (AX6000) kit. It was fully installed and going about our business until I wanted to source parts to build a...
Show results in replies (9)
-
Has a factory reset and setup from scratch been performed since last FW update? A complete pul...
-
Thank you for your reply! I loaded the updated firmware last night thinking that w...
-
Oh it's across multiple devices and browsers. I mentioned to my wife that there was a strange netwo...
-
...dgesuite.net, the Akamai Technologies content delivery network (CDN) blocking the public IP address y...
-
Try a different browser and device as well to test that web site.
-
Well, I thought I had fixed it with the MAC address error since Home Depot was accessible again, ho...
-
If you turn off the CM modem and RBR, then disconnect the RBR from the CM modem, connect up this on...
-
OK, something really strange is going on. I did exactly what you told me to, the steps, in...
-
...he same public IP address triggered this) Part 3 might be caused by malware or similar. Y...
2024-04-17
12:30 PM
Hello folks - anyone else using a CM3000 and experiencing painfully slow speeds? I've ran through the typical troubleshooting (reboot, factory reset), confirmed the Modem is all green for Up/d...
Show results in replies (9)
-
Wanted to follow up on this - I stopped by xfinity store and picked up an XB8 from t...
-
This is with a direct connection to the Modem. I've removed the router from the equation in my trou...
-
Based on your cable connection values, you are definitely not in an area that has been upgraded to ...
-
Attaching the logs w/my CM3000 MAC redacted.
-
According to xfinity (they sent a confirmation email & techs confirmed via chat) that we are in...
-
Got a screensnip of the cable connections page and event logs? One thing to try is have Com...
-
@mykchicken wrote: Wanted to follow up on this - I stopped by xfinity store a...
-
I've had their techs remove it from my account and reprovision it 3 times over the last week with n...
-
Is this with a directly connected PC or is there a external wifi router in the mix? Brand and model...